00198611-01_IM_712.0_R18-2_EN - 第20页

Station Software Ver sion 712.0 (R18 - 2) / Installation Manual 11/2018 Edition 20 4.2.1.1 Station Com puter/Coplan Computer with 3D Coplan Sensor Optionally, the copl anarity module wit h the 3D coplan sensor (type 37) …

100%1 / 78
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
19
Name SIMATIC BoxPC 827C
CPU / clock frequency Intel® Core
(TM)
i3 / 2.13 GHz
RAM 2 GB
Harddisk HDD
Serial interfaces 1
USB interfaces Yes
Network 2x 100 MBit
Table 4-6: Station computer hardware SIPLACE X-, X S-, SX-, DX- and CA-series
Name SIMATIC BoxPC 627D/827D
CPU / clock frequency Intel® Core(TM) i3 / 2,40 GHz
Exchange PC for 60x:
Intel® Celeron® G1820TE / 2,20 GHz
RAM 4 GB
Harddisk SSD
Serial interfaces 1
USB interfaces Yes
Network 2x 1000 MBit
Table 4-7: Station computer hardware SIPLACE X- and CA-series
Name iBase ABP 402-A
CPU / clock frequency Intel® Celeron® CPU 1020E / 2,2 GHz
RAM 4 GB
Harddisk SSD (SX-series), HDD (E by SIPLACE)
Serial interfaces 2
USB interfaces Yes
Network 2x 1000 MBit
Table 4-8: Station computer hardware SIPLACE SX-series, E by SIPLACE
Name SIMATIC MicroBox 427D
CPU / clock frequency Intel® Core
(TM)
/ 1,6 GHz
RAM 4 GB
Harddisk SSD
Serial interfaces 1
USB interfaces Yes
Network 2x 1000 Mbit
Table 4-9: Station computer hardware SIPLACE X-Series S, TX- and CA-series
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
20
4.2.1.1 Station Computer/Coplan Computer with 3D Coplan Sensor
Optionally, the coplanarity module with the 3D coplan sensor (type 37) can be installed in the
SIPLACE X-series, SX1/SX2 (V2) and X-series S placement machines.
Detailed information on the 3D coplanarity module can be found in the corresponding Assembly
Instructions, item numbers [00195344-xx] (for X-series), [00196842-xx] (for SX1/SX2) und
[00197395-xx] (for X-series S).
4.2.1.2 Station Computer/Feeder Computer for SIPLACE BulkFeeder X
Optionally, the SIPLACE BulkFeeder X can be set up and installed at the X-series, X-series S,
X4 S micron and SX1/SX2 (V2) placement machines.
Detailed information on the SIPLACE BulkFeeder X can be found in the SIPLACE BulkFeeder X
Operating Manual, item no. [00198045-xx].
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
21
4.3 Network Configuration
Station
computer
Coplan computer /
feeder computer
Private network between
station computer and Coplan
computer / feeder computer
SIPLACE LAN
SIPLACE Pro
Figure 4-1: Network connections between the machine and SIPLACE Pro
In two-computer operation a separate private network is set up between the station computer and
the Coplan computer or feeder computer via a subnet mask.
Fixed IP addresses for the station computer, Coplan computer or feeder computer can thus be
assigned for all SIPLACE machines. These IP addresses are not known outside the private
network, for instance in the SIPLACE LAN.
These IP addresses need not be further configured by the operator while the station software is
being installed.
Please also refer to chapter 6.