00198611-01_IM_712.0_R18-2_EN - 第42页
Station Software Ver sion 712.0 (R18 - 2) / Installation Manual 11/2018 Edition 42 5.5.1 Error Handling If an error occurs durin g installation, t he setup is interrupted a nd a correspondin g error message displayed. Fi…
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
41
The patch is now ready to be installed. The following dialog box is displayed.
Figure 5-29: Ready for installation
Before installing, you can check the available, required and recommended disk space (per drive) to
perform the installation. In this case:
► Click the Disk Space button.
Please refer to section 5.4 for more information.
Otherwise:
► Click the Install button to start the installation.
► Exit the setup wizard after successful installation.
► Restart your computer for all changes to take effect.
The installed updates are displayed under Programs and Features in the Control Panel.
Figure 5-30: Installed updates
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
42
5.5.1 Error Handling
If an error occurs during installation, the setup is interrupted and a corresponding error message
displayed.
Figure 5-31: Error during installation
► Ensure that the Create Error Report on end option is selected (default).
► Click OK to exit the setup wizard.
You will be prompted to store the Error Report (as zip file).
► After the problem has been solved, start the Station_SW_Patches.exe file to run the installation
again.
Figure 5-32: Another version of patch bundle installed
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
43
Figure 5-33: No suitable station software version installed
► Click the OK button to exit the setup wizard.
► After the problem has been solved, start the Station_SW_Patches.exe file to run the installation
again.