00198611-01_IM_712.0_R18-2_EN - 第48页
Station Software Ver sion 712.0 (R18 - 2) / Installation Manual 11/2018 Edition 48 Before installi ng, you can check the avai lable, required and recommended disk s pace (per drive) to perform the installatio n. ► Click …
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
47
The Packages and Features dialog box is displayed.
Figure 5-36: Packages and Features
All available languages are enabled by default.
► If desired, unselect languages you do not want to install.
► Click the Next button.
The Language Pack is now ready to be installed. The following dialog box is displayed.
Figure 5-37: Ready for installation
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
48
Before installing, you can check the available, required and recommended disk space (per drive) to
perform the installation.
► Click the Disk Space button.
The Disk Space Requirements dialog box is displayed.
Figure 5-38: Disk Space Requirements
► Click the OK button.
The Ready to install dialog box is displayed again.
► Click the Install button to start the installation.
The setup status is displayed during installation.
Figure 5-39: Setup status
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
49
After successful installation, the following dialog is displayed.
Figure 5-40: Installation completed
► Click the OK button to exit the setup wizard.
When the installation has been completed, the language(s) you selected will be available on the
station software GUI and SIPLACE Vision GUI respectively.
NOTICE
Uninstalling the Language Pack
Please note that if you uninstall the Language Pack, all installed languages will be
uninstalled (Chinese included!). Single languages cannot be selected or deselected.
If Chinese shall be installed again, the standard Station Software installation must be
modified.
► Follow the instructions in section 8.1.
► In the Features and Packages dialog, enable the Chinese language, too.