KE-750_MS - 第242页
With teaching adjust monitor cross cursor to near center of mark and press HOD Enter key. When "OK" is selected, mark is recognized and then front standard pick point offset is calculated with obtained coordina…
4.17 Standard Pick Point Offset
Select "2/Offset set-up" then "a/Pick-up reference position offset" and the standard pick point offset
setting dialog will appear as follows.
(1) Setting Items
No. Item Contents
1 Front Offset value from front standard pick point setting position
2 Rear Offset value from rear standard pick point setting position
(2) Method of Setting
– Enter values directly with the keyboard or follow the internal operating instructions for
automatic input.
– Select HOD device key to enter teaching.
– Use control menu to move head if in the way.
– Operating method of automatic input
Follow instructions to operate and values will automatically acquire.
Set bank fixing position recognition jig on front fixing plate.
Once completed, select "OK".
Selecting "OK" moves OCC to above the mark of the bank fixing position recognition jig.
2-74
With teaching adjust monitor cross cursor to near center of mark and press HOD Enter key.
When "OK" is selected, mark is recognized and then front standard pick point offset is calculated
with obtained coordinates and modification made.
Remove bank fixing position recognition jig from front fixing plate.
Once completed, select "OK".
Selecting "OK" sets rear standard pick point positioning.
Setting is the same as for the front.
Setting is completed.
Select "OK" to return to default operating screen.
2-75
4.18 General Mounting Offset
Select "2/Offset set-up" then "b/General offset of placement" and the general mounting offset setting
dialog will appear as follows.
– Setting Head
The head to be set is selected from the combination box.
Press "Alt" + " " keys and the following overview will appear.
This does not affect the "Unit Available" setting in machine setup. (Can also be selected for
units not checked "Unit Not Available".)
(1) Setting Items
No.
Item Contents
1 Mounting General Offset Overall offset value of mounting par
(2) Method of Setting
– Select setting head with tuning know and then enter values for that head directly with
keyboard.
2-76