5M-1751-004w_G5S - 第35页
Safety Precautions Safe-26 1OM-1751 1305-002 5. Alert Labels No. Alert Labels and Description (7) CAUTION 10-0146- Do not let your finger get caught in this. An injury will result. Description When a covers (door type)…
Safety Precautions
Safe-25
1OM-1751
1303-001
5. Alert Labels
No. Alert Labels and Description
(4)
Description
Only well-trained service personnel shall replace the cutter blades. Otherwise, a
hand injury, etc., will result.
(5)
Description
This label indicates that high voltage is applied to the area. Residual voltages may
remain behind for a few minutes in the internal devices of the machine after power
interception.
Before performing maintenance work, wait until the charge lamps of the DC power
supply and the servo amplier go "OFF" in 10 minutes or more after the power
breaker is set to "OFF".
(6)
Description
Before connecting to the breaker's primary power leading-in section, connect the
grounding cable (PE).
Imperfect grounding will cause an electric shock.
Safety Precautions
Safe-26
1OM-1751
1305-002
5. Alert Labels
No. Alert Labels and Description
(7)
CAUTION
10-0146-
Do not let your finger
get caught in this.
An injury will result.
Description
When a covers (door type) is opened or closed, be sure to hold the grip rmly and
slowly move the cover up or down. Otherwise, your hand and ngers might get
caught in the door and get injured.
(8)
Description
Before maintenance work, shut o the power breaker and lock it with the padlock.
Even when the power breaker is set to "OFF", the primary line is powered, making
it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before maintenance
work.
(9)
Do not put any object
on this section.
This might damage the machine.
10-0326A
Description
Do not put any object on the machine. Doing so might damage the machine.
This might damage the machine.
Safety Precautions
Safe-27
1OM-1751
1305-002
5. Alert Labels
No. Alert Labels and Description
(10)
CAUTION
Your hand might be caught in the moving section. Do not
put your hand into the cover opening during the machine
operation.
Pay attention to the moving
mechanisms!
10-0249-
Description
Do not put your hand inside the machine while the machine is running.
Otherwise, your hand may be trapped in the moving mechanisms, causing injury.
(11)
10-0339-
CAUTION
When the feeder base is moved up and down
and your finger is put into the moving section,
you might get injured.
Do not put your hand into the moving section.
Your hand or finger might be crushed.
Description
Do not put your hand in the moving area while the feeder base is moving up or
down.
While the LED of a [FEEDER READY] switch is ickering, it indicates that the
feeder base is moving upward or downward.
(12)
10-0334-
Strong Magnetism!
Do not bring any metal close to this.
Otherwise, such metal will easily be
magnetized and attracted,
causing an injury to the operator.
CAUTION
Description
Strong permanent magnets are used in the moving sections of the X/Y beam.
•
Do not bring any metal of high magnetizability close to this. Otherwise, such metal will easily
be magnetized and attracted, causing an injury to the operator or breakdown of the machine.
•
Do not bring any object such as a magnetic card or a watch close to the magnets.Such an object
can easily be affected by the magnetism. Otherwise, the data of the magnetic car might be
cleared or a watch, etc., may be damaged due to the strong magnetism.