00198829-01_SM_X-Series-S_Hxxxx_EN - 第11页
1 Introduction Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 11 1 Introduction This service guide is a manual or reference work for performing service work on the SIPLACE® X- Series S placement machines from s…
10 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
Contents:
1 Introduction
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 11
1 Introduction
This service guide is a manual or reference work for performing service work on the SIPLACE® X-
Series S placement machines from serial no. Hxxxx onwards.
For additional information, please also observe the instructions for the individual placement heads,
where necessary.
An overview of what is new and of any differences can be found in the following tables:
Serial number from H0001
●
BoxPC 427d
●
CIN box (CAN bus)
●
MGCUs
●
Power supply unit SMPS
●
IOCU 2
●
GigE and new cameras
●
Cable harness and trailing cable interface
Serial number from H1440
●
SIPLACE C&P20P2 in vacuum and ven-
turi mode
●
Multitouch monitor without keyboard
[03211595‑xx] multitouch kit
– Optional 15" monitor and keyboard:
Monitor SCD1520 TDC [03078913‑xx]
Keyboard set [03211595‑xx]
●
Component camera SST48
●
2D track barcode
Barcode set for four locations
[03216618‑xx]
●
Station software 713.0/712.2
SIPLACE Pro 16.1^
●
SIPLACE C&P20P2
Requirements:
– Head interface module C700X-L HR
[03091013-04]
– Head interface module C700X-R HR
[03091023-04]
– Gantry sensor module HCU X‑SeriesS
[03071974‑02]
– Positioning control for the gantry axes
MGCU-3 [03103477‑04]
– Positioning control for the gantry axes
MGCU-2 [03117531‑03]
– X-FCU, 80MHz, 40tracks
[03170613‑xx]
Serial number from H2500
●
New vacuum pump
Vacuum pump Becker VX 4.25 IE3 with cable [03212135Sxx]
1 Introduction
1.1 Safety instructions
12 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
1.1 Safety instructions
DANGER
Nonobservance of these safety instructions may cause injury to personnel and dam-
age to the machine!
► Please observe the safety instructions in the user manual of the relevant machine
for all work!
1.1.1 Conventions for the use of safety instructions and symbols
Safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► This symbol indicates actions that have to be performed by the operator.