00198829-01_SM_X-Series-S_Hxxxx_EN - 第21页
1 Introduction 1.4 Staff qualifications and training Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 21 1.4 Staff qualifications and training Qualified or adequately trained personnel means that these people are f…
1 Introduction
1.3 Other instructions
20 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
1.3.4.5 Dispatching ESD modules
► Always store modules and components in conductive packaging (e.g. metallized plastic bags
or metal sleeves) and dispatch them in conductive packaging
► If the packaging is not conductive, place the modules in a conductive envelope before pack-
aging. Use conductive expanded rubber, ESD bags, domestic aluminum foil or paper, for
example. NEVER use plastic bags or film.
► If the module has integral batteries, ensure that the conductive packaging does not touch or
short circuit the battery terminals and, if necessary, first cover the terminals with insulating
tape or material.
1.3.5 Validity of Document
This document contains service work instructions for all SIPLACEX3 S, X4and X4iS machines.
The service work described in this manual is divided into modules and is largely identical for all
machine types:
●
If the work required for specific machines differs from the standard procedure, this will be in-
dicated with reference to the machine number, series and delivery state.
●
Diagrams should be seen as examples e.g. the diagram of a SIPLACEX3 S or a different
machine paint finish does not mean that the following information only applies to the machine
type shown.
The manual focuses on describing mechanical service work.
Please refer to the circuit diagram folder for any electrical checks:
●
Detailed circuit diagrams folder for SIPLACE X-Series S (from Hxxxx) [DE+EN:00197920‑03]
●
Detailed circuit diagrams folder for SIPLACE X-Series S (from H1440) [DE EN: 00197920-04]
●
Detailed circuit diagrams folder for SIPLACE X-Series S (from H2500) [DE EN: 00198730-xx]
1.3.6 Release History
Document
SIPLACE X-Series S
(from Hxxxx)
Service manual
Release 01/2021
●
Initial release
1.3.7 SIPLACE on the World Wide Web (WWW)
Log in to our SIPLACE® homepage at http://www.asm-smt.com.
You can choose between the German and English version.
The different sections contain information about our products, services and contact persons.
In addition, registered customers can also access the MySIPLACE user group. Here, you can
access special information about our placement systems, e.g.:
●
Technical documentation
●
Technical information
●
Spare parts lists
Registration for the MySIPLACE user group is very simple:
► Click on MyASM and then on Registrieren.
► Fill in the registration form and send it off to us.
Soon afterwards, you will receive your access authorization with user name and password.
1 Introduction
1.4 Staff qualifications and training
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 21
1.4 Staff qualifications and training
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and maintenance of the machine and the add-on devices and are suitably qualified, e.g.:
●
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
●
Have been trained or instructed in the upkeep and use of appropriate safety equipment in
accordance with normal safety standards.
1.5 Abbreviations
Abbreviations Description
PA, PA1, PA2 Placement area, Placement area 1, Placement area 2
CO Component
COT Changeover table
COT-i Changeover table insert
C&P Collect&Place
CPP Collect&Pick&Place
DC Dual conveyor with 2 lanes
ESD Electrostatic sensitive device
EMC Electromagnetic compatibility
SC Single conveyor with 1 lane
FHE Fast Hardware Exchange
PCB PCB board
P&P Pick&Place
SCS Single Core Solution
SC Station computer
TH TwinHead
WPC Wafflepack changer
ID Intermediate distributor
1 Introduction
1.5 Abbreviations
22 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021