00198829-01_SM_X-Series-S_Hxxxx_EN - 第22页
1 Introduction 1.5 Abbreviations 22 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
1 Introduction
1.4 Staff qualifications and training
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 21
1.4 Staff qualifications and training
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and maintenance of the machine and the add-on devices and are suitably qualified, e.g.:
●
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
●
Have been trained or instructed in the upkeep and use of appropriate safety equipment in
accordance with normal safety standards.
1.5 Abbreviations
Abbreviations Description
PA, PA1, PA2 Placement area, Placement area 1, Placement area 2
CO Component
COT Changeover table
COT-i Changeover table insert
C&P Collect&Place
CPP Collect&Pick&Place
DC Dual conveyor with 2 lanes
ESD Electrostatic sensitive device
EMC Electromagnetic compatibility
SC Single conveyor with 1 lane
FHE Fast Hardware Exchange
PCB PCB board
P&P Pick&Place
SCS Single Core Solution
SC Station computer
TH TwinHead
WPC Wafflepack changer
ID Intermediate distributor
1 Introduction
1.5 Abbreviations
22 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
2 Basic Machine
2.1 Overview of X-Series S Machines
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 23
2 Basic Machine
DANGER
Observe User Manual
► Please observe the safety instructions in the user manual for all work!
2.1 Overview of X-Series S Machines
Fig.5: Machine overview
1. Location 1
2. Location 2
3. Location 3
4. Location 4
5. MGCU, BoxPC, I/O modules
6. Power supply
2.1.1 Serial Number of Module
Fig.6: Typeplate
The serial number of your placement
machine can be found at location1, on the
typeplate(1)
and behind the distributor
door(2)
, on the right, above the distributor.