00198829-01_SM_X-Series-S_Hxxxx_EN - 第337页
9 Component feeding 9.4 Docking Station for Component Trolley Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 337 9.4 Docking Station for Component Trolley DANGER Observe User Manual ► Please observe the safety in…
9 Component feeding
9.3 X-Series Component Trolley
336 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
9.3.7 Replacing the Actuator/Protective Bracket
Parts
Fig.473: Actuator
1. Actuator AZ335 Schmersal
[03013488‑xx]
2. Protective bracket: holder and protec-
tion for actuator [03095447-xx]
Equipment and tools
00376503-xx Set of Torx offset screwdrivers with spherical heads
03148413-xx Bit 1/4, TX20 with drilled hole (for screw ISO 7380-TX with pin - M4)
00353832-xx Allen key set
00334892‑xx Loctite 243
Removal
► Remove the two screwsfastening the actuator/protective bracket and then remove the actu-
ator/protective bracket.
Installation
Follow the removal instructions in reverse order for installation. Also observe the following instruc-
tions:
► Fix the actuator with two fastening screws to the protective bracket (torque 2.0Nm, Loctite
243).
Fig.474: Setting the actuator
► Set the actuator with the help of the ad-
justment screw (3)
.
Between the upper edge(1)
of the
table and the actuator(2)
you need to
set an angle of 13°+/‑1°
.
The actuator must be able to slide into
the safety switch without rubbing
against the plastic.
9 Component feeding
9.4 Docking Station for Component Trolley
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 337
9.4 Docking Station for Component Trolley
DANGER
Observe User Manual
► Please observe the safety instructions in the user manual for all work!
9.4.1 Docking station for component trolley - overview
Fig.475: Docking station – front
1 Docking station – assembly [00116933-xx]
2 Unlocking pushbutton [00334095-xx]
9.4.10
"Replacing the unlocking pushbutton" [}351]
3 Power pack and pressure control valve for locking cylinder (behind the cover)
9.4.2
"Replacing the power pack" [}339]
4 Locking lever [03025104-xx]
9.4.5
"Replacing the locking lever" [}343]
5 Feeder unlock device 40-fold [03011582-XX]
9.4.7
"Replacing the 40-fold feeder unlocking device" [}346]
6 Feeder Control Unit (FCU)
9.4.8
"Replacing the Feeder Control Unit (FCU)" [}347]
7 Short-stroke cylinder for locking unit [03034831‑xx]
9.4.4
"Replacing the locking unit short-stroke cylinder" [}341]
9 Component feeding
9.4 Docking Station for Component Trolley
338 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
Fig.476: Docking station – back
1 Control valve [03003489-xx]
9.4.11
"Replacing the control valve" [}353]
2 ON/OFF switch
3 Microfuse [03033387-xx]
9.4.3
"Replacing the micro switch" [}340]
4 Pressure control valve for bulkcase feeder and main connection (5.5 bar)
9.4.6 "Replacing the positions end switch of the component trolley locking device" [}344]
9.4.9 "Replacing the Complete Coupling - Earthing and Compressed Air for the Bulk
Case" [}350]