00198829-01_SM_X-Series-S_Hxxxx_EN - 第355页

9 Component feeding 9.5 Manual Table and JEDEC Tray Feeder Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 355 Fig.507: SIPLACE JTF-S – back 1. Manual operation / Manual panel 2. Loading direction for empty JEDEC…

100%1 / 382
9 Component feeding
9.5 Manual Table and JEDEC Tray Feeder
354 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
9.5 Manual Table and JEDEC Tray Feeder
NOTICE
See the assembly instructions
For more information about the manual table and the JEDEC tray feeder, read the following
documents:
► Assembly instructions JEDEC Tray Feeder – X-Series S [00197446-xx]
► User manual JEDEC Tray Feeder [00197446-xx]
9.5.1 Manual table
Fig.505: Manual table
1. Fixture bar
2. FCU
3. Guide profiles on the front section
4. Fixture bar
5. Guide profiles on the back section
6. Fiducial feeder
7. Pneumatics
8. Feeder infeed
9. Location for the JTF
9.5.2 SIPLACE JTF-S
Fig.506: SIPLACE JTF-S – front
SIPLACE JTF-S [166670]:
1. Tray clamp
2. Toothed belt
3. Return tray pusher
4. Feeder control (behind cover)
9 Component feeding
9.5 Manual Table and JEDEC Tray Feeder
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 355
Fig.507: SIPLACE JTF-S – back
1. Manual operation / Manual panel
2. Loading direction for empty JEDEC
trays
3. Tray pick position
4. Feeder control (back)
5. Tray switch thick/thin
6. Tray lift
9.5.3 Adapter
Fig.508: EEPROM and adapter board 30V
1. EEPROM
2. Adapter board 30 V
9 Component feeding
9.6 Smart Pin Support
356 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
Fig.509: Adapter
1. Adapter for SIPLACE JTF-S, SIPLACE
JTF-M
– Adapter for SIPLACE JTF-M
[03110216-xx]
– Adapter for SIPLACE JTF-S
[03110552-xx]
The two adapters are mechanically identical
and differ only in their eSW.
9.6 Smart Pin Support
Follow the instructions in the assembly guide for all work to the Smart Pin Support:
●
Assembly instructions "Smart Pin Support" for SIPLACE X‑SeriesS [DEEN:00197394‑xx]
Comparison
1. Pin picker on the SIPLACE X-
Series with new strain reliefs
2. Pin picker on the SIPLACE X-
Series with old strain reliefs
 NOTICE!
Exemplary description
The service work is described
using the example of a Pin
Picker for the SIPLACE SX1/
SX2 V2 with old strain reliefs.
The procedure is the same
for other machines or other
Pin Picker versions. Any rel-
evant differences will be men-
tioned explicitly.
.
NOTICE
Fastening screws
The screws fastening the Pin Picker are captive screws in the SIPLACE X-Series S.