00198829-01_SM_X-Series-S_Hxxxx_EN - 第379页
10 Miscellaneous 10.1 eSW Download (SW 70x) Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 379 10 Miscellaneous 10.1 eSW Download (SW 70x) Fig.544: Select operator level ► Select the button. ► Select the button.…
9 Component feeding
9.6 Smart Pin Support
378 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
9.6.18.1 Magazine recognition board
Fig.543: Magazine recognition board [03093494-xx]
The magazine recognition board is part of the
pin magazines for the "Smart Pin Support"
option.
This board may be missing, depending on the
magazine version used.
LEDs:
H3: not used
H4: FPGA OK
H6: Power supply 3.3 V OK
DIP switch S1 - jumper assignment
S1.1 S1.2 Magazine connected at:
ON OFF NC connection 2
OFF ON NC connection 4
S1.4 S1.5 S1.6 Meaning
OFF OFF OFF Garage is switched off
ON OFF OFF Garage type W5
OFF ON OFF Garage type Q10
ON ON OFF Garage type L10
X X ON Reserved
NOTICE
Jumper S1.3 is not used.
10 Miscellaneous
10.1 eSW Download (SW 70x)
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 379
10 Miscellaneous
10.1 eSW Download (SW 70x)
Fig.544: Select operator level
► Select the button.
► Select the button.
► Switch over to the operator level Ma-
chine service.
ð The button will be shown.
Fig.545: Service menu
► Click the button to enter the Ser-
vice menu.
► Click on the Embedded software but-
ton.
Fig.546: Embedded software menu
Select the required function:
► Click on Update machine… to check
the entire machine and to perform an
eSW download for multiple subsystems
(see next picture).
► Click on Update subsystem… to se-
lect one subsystem, check and to per-
form an eSW download.
► Click on the button Version informa-
tion…, to view all versions of the sub-
systems, BIOS, application 1/2/3/5.
10 Miscellaneous
10.1 eSW Download (SW 70x)
380 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
Fig.547: Select subsystem
► Select the subsystem for the eSW
download.
► Click on the Continue button.
Fig.548: Update machine menu
●
On the left, you can see the selection
buttons:
BIOS
Application 1
Application 2
Application 3
....
●
The large main area in the center
shows the status of the individual sub-
systems.
The lower edge of the main area shows
how many subsystems must still be
downloaded.
●
The button Start update starts the
download