96722_AX-201 AX-301 AX501 Spec bookl - 第36页
34 of 34 Notes:
Compatibility matrix
32 of 34
NOZZLE COMPATIBILITY
Nozzle PH-SV PH-LV PH-DV PH-HA Component range
CPL1 o o - - 01005
CPL2 o o - - 0201-0402
CPL3 o o - - 0402-0603
CPL4 o o - - 0603-0805
L3-L7 o o - -
L8 o o o - Please refer to the graphics below this table
V3 ooo-
V4-V7 o o -
O1 o o o - R1812 and up, C1812 up to C2220, capacitors
up to 6mm, type C and D molded cap and
inductor, DPAK, SO IC 5&7mm, TSOP,
QFP 5&7mm
O2 o o o - Capacitor 6&>8mm, DPAK, SO IC's 7&>8mm,
TSOP, QFP 7&14mm, BGA 14mm
O1 - - - o R1812 and up, C1812 up to C2220, capacitors
up to 6mm, type C and D molded cap and
inductor, DPAK, SO IC 5&7mm, TSOP,
QFP 5&7mm
O2 - - - o Capacitor 6&>8mm, DPAK, SO IC's 7&>8mm,
TSOP, QFP 7&14mm, BGA 14mm
O3 - - - o QFP 14&20mm, BGA 14&20mm
O4 - - - o QFP > 28mm, BGA >28mm
O5 - - - o large and heavy components, needs a minimum
contact area on the component of 7.8x27.5mm
I1 - - - o R0402-R1206, C0402-C0603, small transistors
up to SOT 323, SOT 323, 23, 25 & 143
I2 - - - o R0603-R1206, C0603-C1210, type A molded
cap and inductor, small transistors SOT 323,
23, 25 & 143, power transistors SOT 89
I3 o R1206-R1812 and up, C1206-C1812, type A,
B & C molded cap and inductor, power
transistors SOT 89 & 223, SO IC 8 pin max
I4 - - - o 0603-LL41
I10 - - - o R0201, C0201-C0402
FC1 - - - o flip chips ranging in size from 0.5*0.5mm to
1.0*1.0mm
FC2 - - - o flip chips ranging in size from 1.0*1.0mm to
2.0*2.0mm
FC3 - - - o flip chips ranging in size from 1.5*1.5mm to
4.0*4.0mm
FC4 - - - o flip chips ranging in size from 3.0*3.0mm to
8.0*8.0mm
S1 - - - o rectangular connectors,needs a minimum
contact area on the component of 2.5x10mm
S2 - - - o small trimmers
S3 - - - o large trimmers and filters
Figure 18
Figure 19
Compatibility matrix
33 of 34
AX-301/AX-501 Toolbits compatible
for Laser Alignment
AX-301/AX-501 Toolbits compatible
for Component Vision Alignment
34 of 34
Notes: