00197193-02_IM_SIPLACE_EDM_2.1_EN - 第32页

EDM V2.1 / I nstallat ion Ma nual Ausgabe 11/2012 E dition 32 Figure 5-4: Line servers Here you sp ecif y the list of Line Servers for which the application template has to be applied . ● (A list of) Line alias nam e (s)…

EDM V2.1 / Installation Manual Ausgabe 11/2012 Edition

Forced pull mode

For this type of data transfer, the time after which the data preparation engineer will be notified that

no new data has been pulled for the line must be specified via Configure. The time is specified in

hours.

Figure 5-2: Forced pull mode configuration

5.3.6.2 Overwriting

Figure 5-3: Settings for overwriting object types

You can select the object types to be overwritten when the data is imported to the line here.

5.3.6.3 Line server

EDM V2.1 / Installation Manual Ausgabe 11/2012 Edition

Figure 5-4: Line servers

Here you specify the list of Line Servers for which the application template has to be applied.

● (A list of) Line alias name(s) (as defined in the Lines Settings tab, cf. section 5.3.3) make the

template visible to the specified EDM line(s)

● [All] (the default value) makes EDM present the template to all line servers

5.3.7 Notifications/Rules…

CAUTION

This part of the system is highly sensitive. In extreme cases, incorrect settings can lead

to the loss of important changes or, on the other hand, the data preparati

on engineer can

be "bombarded" with notifications regarding irrelevant changes.

NOTICE

With version EDM 2.1, this part of the EDM system has experienced major changes.

Notification filter definitions used in former versions of EDM are barely compatible to the

rules system. It is strongly recommended to re-implement the filters in use on the

installation site, based on the users’ wishes.

It is not always desirable to inform the data preparation engineer about a data change on a Line

Server, for example, when a re-optimization is being performed on the line. In this case, a number

of internal SIPLACE Pro objects (for example HeadSteps, i.e. individual process steps for a head)

are changed, and these changes would then need to be commented accordingly by the user and

put in the Clearing Pool, but they do not contain any information. Furthermore, there are customer

processes that imply a selection of change notifications, for example, when just the pure product

data (board, components, etc.) is centrally administered and the process-specific data is recreated

on each line. In such a scenario, only changes to the product data are of interest, and changes to

the jobs and recipes are not.

The notification filter rules are intended to consider these circumstances. You specify the object

types and objects for which no change notifications are to be sent to the Master Server. The

notification filter rules only affect data changed on an EDM Line Server.

EDM V2.1 / Installation Manual Ausgabe 11/2012 Edition

5.3.7.1 The rule set

By default, changes on EDM Line computers are transferred to the EDM Master and collected in

the clearing pool.

The predefined set of rules prevents that changes by EDM specific actions and typical user

scenarios (e.g. “Level 3 Optimization” on the EDM Line) are sent to the EDM Master. Its behavior

may be changed by editing or adding a rule to the rule system.

A defined rule is enabled if the associated box is checked.

Active filter rules are shown in bold letters, active processing-only rules in italic letters. On the

right-hand side of the GUI, a summary description of the selected rule is given.

5.3.7.1.1 Rule set evaluation

• The rules are evaluated in descending order of the rule set list. Use the up- and down-

buttons to control the sequence of the rules.

• The handling option of the first rule that matches the incoming notification

determines its target destination, and the evaluation of the rule set is

terminated.

- However, a matching rule with “Not Specified” handling option just applies its

processing instructions (e.g. sending an e-mail or changing the comment), and the

evaluation continues with the next rule in the list

• If none of the rules matches, the default behavior (showing a comment dialog on the EDM

Line and sending the changes to the clearing pool) is applied.

Figure

5-5 EDM Notification Rule Set Editor