444CEMM2(CM201).pdf - 第104页

Page A-1 444C-E-MMA0A-A01-00 MA TERIAL SAFETY DA T A SHEET Product name : SHELL ST AMINA GREASE RL2 Manufacture’ s name : Showa Shell Sekiyu K.K. FIRST AID MEASURES Symptoms and effects : Not expected to give rise to an …

100%1 / 107
Routine Check List (1/1)
Modular High Speed Placement Machine
CM201/202
[Remarks]
[Make copy and use this figure for checking.]
Approval
Signature
Check
∗ When the result of the check is failure,
make contact with ___________ at once.
Passing ..................... OK
Failure .......................NG
Applying grease ........
Result of check
• For the check of once / week, check on the th day of real running every week.
• For the check of once / month, check on the
th day of real running every month.
• For the check of once / quarter, check on the
th day of real running every 3 months.
• For the check of once / half a year, check on the
th day of real running every 6 months.
• If the device does not run, write the mark ( ).
Cycle check
∗ The cycle for checking must be varied by the change of the run time and the number of the production for some routine
check items. However follow the direction by an instructor.
444C-409TE
tinU
dnakcehcrofstraP
noitacirbul
noitacirbuldnakcehC
rodradnatS
liodeificeps
doireP ecnerefeR 1 2 3 4 5 6 7 8 9 01 11 21 31 41 51 61 71 81 91 02 12 22 32 42 52 62 72 82 92 03 13
)ydobniam(tinuRM
eguagerusserP )noitarepoerofeb(erusserpriakcehCaPM87.0otaPM94.0)D1(h421-3-1
reviecerretaW)noitarepoerofeb(retawytpmE—)D1(h421-3-1
egrahcsidstrapGN
)ydobniam(xob
yarT)noitareporetfa(naelC—)D1(h424-3-1
-decroFehtgninaelC
tinUgnitcejE-pihC)noitpo(
tengaM,hsurB
naelC—)W1(h0418-4-1
tinuY-X
wercsllabsixa-XetacirbuL
ANIMATSLLEHS
2LRESAERG
)W1(h0416-4-1
gniraebraenilsixa-XetacirbuL
ANIMATSLLEHS
2LRESAERG
)W1(h0416-4-1
wercsllabsixa-YetacirbuL
ANIMATSLLEHS
2LRESAERG
)W1(h0416-4-1
gniraebraenilsixa-YetacirbuL
ANIMATSLLEHS
2LRESAERG
)W1(h0416-4-1
erusserpwolBehtfognittesehtkcehCerusserpwolBehtkcehC—)M1(h0653-5-1
ehtroF,elzzonehtgnitcelesroF(evlaV
)rednilyc
)tiKgnicalpeR(egnahcxE—)Y2(h000212-8-1
raebelbaCegnahcxE—)Y3(h000813-9-1
tinuZ
wercsllabsixa-ZetacirbuL
ANIMATSLLEHS
2LRESAERG
)W1(h0416-4-1
redlohelzzoN
)daehrefsnart(
noihsucelzzonrofgnirpSnaelC—)W1(h0413-4-1
ecnerefmucricretuodnarennInaelC—)W1(h0413-4-1
redlohwalcpmalcrofgnirpSesaergylppAV/LEIATREIRRAB)W1(h0413-4-1
mrapmalCesaergylppAV/LEIATREIRRAB)W1(h0413-4-1
ecafrepaTesaergylppAV/LEIATREIRRAB)W1(h0413-4-1
retliFegnahcxE—)W1(h0413-4-1
daehrefsnarT
gniraebtroppustfahselzzoNesaergylppAV/LEIATREIRRAB)M1(h0651-5-1
ssapriAerusserpmuucavehtkcehC—)M1(h0651-5-1
rednilyCriA)tiKgnicalpeR(egnahcxE—)Y1(h00064-7-1
)egnahcmuucavehtroF(evlaVegnahcxE—)Y2(h000211-8-1
tfahSegnahcxE—)Y3(h000811-9-1
redlohelzzoN)tiKgnicalpeR(egnahcxE—)Y3(h000812-9-1
mrapmalC)tiKgnicalpeR(egnahcxE—)Y3(h000812-9-1
redlohwalcpmalcrofgnirpS)tiKgnicalpeR(egnahcxE—)Y3(h000812-9-1
noihsucelzzonrofgnirpS)tiKgnicalpeR(egnahcxE—)Y3(h000812-9-1
lenaphcuotroloC
ecaflenaphcuoTnaelC—)W1(h0411-4-1
thgilkcaBegnahcxE—)Y1(h00066-7-1
royevnocdraoB
elbategnahcxehctabniptroppuSnaelC—)W1(h0414-4-1
tlebrefsnartdraoB
kcehC—)W1(h0415-4-1
egnahcxE—)M6(h00031-6-1
relloR
kcehC—)W1(h0415-4-1
egnahcxE—)M6(h00031-6-1
wercsllabtnemtsujdahtdiWesaergylppA
ANIMATSLLEHS
2LRESAERG
)W1(h0415-4-1
gniraebraeniltnemtsujdahtdiWesaergylppA
ANIMATSLLEHS
2LRESAERG
)W1(h0415-4-1
elbatredeefepaT
ecafgnittesredeefepaT)noitarepoerofeb(naelC—)D1(h423-3-1
sgnidnuorruSnaelC—)W1(h0412-4-1
dornoitcejorPkcehC—)W1(h0412-4-1
gniraebraeniLesaergylppA
ANIMATSLLEHS
2LRESAERG
)W1(h0412-4-1
aremaceniL
ssalgrevoC)noitarepoerofeb(naelC—)D1(h422-3-1
sneLnaelC—)W1(h0417-4-1
)noitpo(xobepatdesU
edisnI)noitareporetfa(naelC—)D1(h425-3-1
tinugnittuC
).noitponasiUD/D(
kcolbedilsedis-tfeLetacirbuL
ANIMATSLLEHS
2LRESAERG
)M1(h0652-5-1
edalbdexifdnaedalbelbavoMegnahcxE—)Y1(h00061-7-1
epatelbuodroftinU
)noitpo(redeef
gniraebraeniLetacirbuL
ANIMATSLLEHS
2LRESAERG
)W1(h0412-4-1
)noitpo(elzzoN
ecafrepatelzzoNnaelC—)W1(h0413-4-1
rotcelferelzzoNnaelC—)W1(h0413-4-1
pitelzzoNnaelC—)W1(h0413-4-1
)noitpo(regnahcelzzoN
rotcelferelzzonehtfoecaftcatnoCnaelC—)W1(h0413-4-1
ydobniaM
pmupmuucaVegnahcxE—)Y1(h00062-7-1
esabredeefepaT
rednilyCriA)tiKgnicalpeR(egnahcxE—)Y1(h00065-7-1
)redeefepatehtforednilycroF(evlaVegnahcxE—)Y2(h000213-8-1
rotacidnI
)rotacidniroloc-3(retacidnisutatSegnahcxE—)Y1(h00063-7-1
retacidniegatSegnahcxE—)Y1(h00063-7-1
-decroFehtgninaelC
tinUgnitcejE-pihC
)noitpo(
tengaM,hsurB
naelC—)W1(h0418-4-1
Year Month
Page A-1
444C-E-MMA0A-A01-00
MATERIAL SAFETY DATA SHEET
Product name : SHELL STAMINA GREASE RL2
Manufacture’s name : Showa Shell Sekiyu K.K.
FIRST AID MEASURES
Symptoms and effects : Not expected to give rise to an acute hazard under normal conditions of use.
First Aid-Inhalation : Inhalation of any vapours from this product is not likely to present an acute hazard.
First Aid-Skin : Remove contaminated clothing and wash affected skin with soap and water.
If persistent irritation occurs, obtain medical attention.
If high pressure injection injuries occur, obtain immediate medical attention.
First Aid-Eye : Flush eye with copious quantities of water. If persistent irritation occurs, obtain
medical attention.
First Aid-Ingestion : Wash out mouth with water and obtain medical attention.
DO NOT INDUCE VOMITING.
Advice to physicians : Treat symptomatically. Aspiration into the lungs may result in chemical pneumonitis.
Dermatitis may result from prolonged or repeated exposure.
FIRE FIGHTING MEASURES
Specific hazards : Combustion is likely to give rise to a complex mixture of gases and airborne particu-
lates, including carbon monoxide, oxides of sulphur, and unidentified organic
and inorganic compounds.
Extinguishing media : Foam and dry chemical powder. Carbon dioxide, sand or earth may be used for
small fires only.
: Water in a jet. Use of Halon extinguishers should be avoided for environmental
reasons.
Protective equipment : Proper protective equipment including breathing apparatus must be worn when
approaching a fire in a confined space.
ACCIDENTAL RELEASE MEASURES
Personal precautions : Avoid contact with skin and eyes.
Personal protection : Wear impermeable gloves and boots.
: Prevent from entering into drains, ditches or rivers. Inform local authorities if this
cannot be prevented.
: Shovel into a suitable, clearly marked container for disposal or reclamation in
accordance with local regulations.
: As for small spills.
Unsuitable extinguish-
ing media
Environmental
precautions
Clean-up methods-
small spillage
Clean-up methods-
large spillage
Page A-2
444C-E-MMA0A-A01-00
HANDLING AND STORAGE
Handling : When handling product in drums, safety footwear should be worn and proper
handling equipment should be used. Prevent spillages.
Storage : Keep in a cool, dry, well-ventilated location. Use properly labelled and closable
containers. Avoid direct sunlight, heat sources, and strong oxidizing agents.
Storage temperature : 0°C minimum to 50°C maximum.
Recommended materials
: Mild steel or high density polyethylene (HDPE).
Unsuitable materials : PVC materials for containers or container linings.
Other information : Polyethylene containers should not be exposed to high temperatures because of
possible risk of distortion.
DISPOSAL CONSIDERATIONS
Waste disposal : Used or waste grease should be recycled or disposed of in accordance with prevail-
ing regulations, preferably to a recognised collector or contractor. The competence
of the contractor to deal satisfactorily with used grease should be established
beforehand. Used or waste grease should not be allowed to contaminate soil or
water.
Product disposal : As for waste disposal.
Container disposal : 200 litre drums should be emptied and returned to the supplier or sent to a drum
reconditioner without removing or defacing markings or labels.
Non-reusable small metal and plastic containers should be recycled where possible,
or disposed of as domestic refuse.