444CEMM2(CM201).pdf - 第13页
Page 2-13 MACHINE P ARAMETER 2 2 2 2-2 Procedures of Machine Parameter T eaching Preparing for the machine parameter teaching Before starting the machine parameter teaching, load the data of the XY plane calibration jig …
Page 2-12
Machine Parameter
2-1-15 Pick-up Position
Pickup position offset
The pickup position for each feeder table is
displayed.
This works as the default of the pickup position
learning.
2-1-16 Status Indicator
Lit, Blink, No and Buzzer of indicator at each “Status” can be set.
Indicator
No, Lit and Blink change in this order.
Buzzer
Buzz, Blink, and No change in turn.
Default
Pressing this initiates all of setting to our
standard.
444C-E-MMA02-A01-03
Page 2-13
MACHINE PARAMETER
2
2
2
2-2 Procedures of Machine Parameter Teaching
Preparing for the machine parameter teaching
Before starting the machine parameter teaching, load the data of the XY plane calibration jig to the
machine at “File Operation.”
Each of “Machine Parameter Teaching” screen can be opened by the following steps.
1. Press
Machine
parameter
.
• The “Machine Parameter Menu” screen
appears.
2. Press Machine parameter teach .
3. Press
UNLOCK
→→
→→
→
START
.
• The “Machine prmtr teach menu” screen
appears.
To the next page
444C-E-MMA02-A02-03
433C-EEn-Mp-002
Page 2-14
Procedures of Machine Parameter Teaching
4. Press the key of the parameter for
teaching.
∗ Org Pick Mount height is pressed as an
example.
5. Select the table for teaching.
6. Start the machine parameter teaching
following the instruction of the
screen.
M67EB
TURN OFF THE SERVO SWITCH BEFORE PLACING YOUR HANDS IN ACTIVE
PART OF THE MACHINE FOR ADJUSTMENT.
You will have serious injury if the machine is actuated.
WARNING
444C-E-MMA02-A02-06