444CEMM2(CM201).pdf - 第26页
Page 2-26 Procedures of Machine Parameter T eaching 11 . Press UNLOCK + Cmr angle teach . ∗ If the angle offset is over the standard value, the message appears, and the machine stops. 12. Press UNLOCK + Recog posn tch . …
Page 2-25
MACHINE PARAMETER
2
2
2
Procedures of Machine Parameter Teaching
7. Close the safety cover.
8. Turn ON the servo switch.
9. Press
UNLOCK
+ .
10. If the nozzle holder is at the position
as shown on the following picture,
press
UNLOCK
+ No ,
otherwise,
press
UNLOCK
+ Yes .
To the next page
OFF ( )
ON ( )
SERVO
444C-455P
444C-E-MMA02-A03-05
You can see the set screw
θ
axis org offset
Cmr mgf power tch
Page 2-26
Procedures of Machine Parameter Teaching
11. Press
UNLOCK
+ Cmr angle teach .
∗ If the angle offset is over the standard value,
the message appears, and the machine stops.
12. Press
UNLOCK
+ Recog posn tch .
• The message “Recog posn Teach ends” is
displayed.
To the next page
444C-E-MMA02-A03-04
Page 2-27
MACHINE PARAMETER
2
2
2
OFF ( )
ON ( )
SERVO
444C-E-MMA02-A03-04
Procedures of Machine Parameter Teaching
13. Turn OFF the servo switch.
14. Press
UNLOCK
+ Jig remove .
• Remove the nozzle jig.
15. Press .
• The “Machine prmtr teach menu” screen
reappears.
444C-EEn-MpMptCrc-022
2
1