LBO für minimale LP-Breite 50mm an D4 - 第36页
2 Assembly instructions SOKO St opper LBO for minimum board size 50 mm SIPLACE D4 LBO 50 mm SIPLACE D4 11/2007 Edition 36 2 A TTENTION: In case of a crash of the con veyor side part s wi th the guid ing shaft s, press th…
LBO 50 mm SIPLACE D4 2 Assembly instructions SOKO Stopper LBO for minimum board size 50 mm SIPLACE D4
11/2007 Edition
35
: Tighten the fixing for the guiding shafts easily.
: Mount the right cover of the output conveyor and tighten the fixing.
2
Fig. 2.11 - 6 Fixing of stopper (right side)
2
: Loosen the screws on the left and right fixing.
2
The position in x-direction is fixed. The guiding shafts have to be mounted on the same level on
both sides. 2
2
: Adjust the level of the guiding shafts with the delivered adjustment gauge.
2
Both guiding shafts have to be on the same level. The setting can be tested by adjusting the con-
veyor width from 50 to 460 mm. 2
2
2
2
2
Adjustment gauge for guiding shafts
2 Assembly instructions SOKO Stopper LBO for minimum board size 50 mm SIPLACE D4 LBO 50 mm SIPLACE D4
11/2007 Edition
36
2
ATTENTION:
In case of a crash of the conveyor side parts with the guiding shafts, press the STOP button and
check the position of guiding shafts. 2
2
2
Fig. 2.11 - 7 Adjusting level of guiding shafts
2
2
2
2
2
2
2
2
2
2
Adjustment gauge for guiding shafts
LBO 50 mm SIPLACE D4 2 Assembly instructions SOKO Stopper LBO for minimum board size 50 mm SIPLACE D4
11/2007 Edition
37
: Exchange the fitting at the left conveyor side part (output conveyor) to flat screw heads.
Otherwise the minimum board size of 50 mm can not be reached.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Exchange of the screws
Mount: M8 DIN 6912