LBO für minimale LP-Breite 50mm an D4 - 第46页

2 Assembly instructions SOKO St opper LBO for minimum board size 50 mm SIPLACE D4 LBO 50 mm SIPLACE D4 11/2007 Edition 46 2.2.3 Changes in SIPLACE PRO The option must be entered in the line configuration in SIPL ACE PRO …

100%1 / 50
LBO 50 mm SIPLACE D4 2 Assembly instructions SOKO Stopper LBO for minimum board size 50 mm SIPLACE D4
11/2007 Edition
45
2.2 Software
2.2.1 Conveyor Firmware
: Start SITEST.
: Download the SOKO conveyor firmware via the SITEST functions.
2
2
This SOKO firmware only runs with machine software 603.xx and 604.xx. 2
2
2.2.2 SITEST adjustments
: Select in SITEST "conveyor functions" at the Icon bar.
: Select the menu item "options and configuration".
: Select the item "conveyor mode" and the function "change conveyor mode", activate "Long
board option and confirm with "Accept".
: Reboot the placement system.
2
Hex file:
TS510613.HEX
Type:
Application
Machine:
SIPLACE D4
Assembly group:
TSP301
HardwareId:
5
HW variant:
S
SW version:
06.13
SW date:
04.10.2007
2 Assembly instructions SOKO Stopper LBO for minimum board size 50 mm SIPLACE D4 LBO 50 mm SIPLACE D4
11/2007 Edition
46
2.2.3 Changes in SIPLACE PRO
The option must be entered in the line configuration in SIPLACE PRO and in the set-up. 2
2.2.3.1 Line configuration
: Select a line and check the Long board check box.
2
2
2
2
2
2
2
2
Click on Long board
Select the line
Click on Long board
LBO 50 mm SIPLACE D4 2 Assembly instructions SOKO Stopper LBO for minimum board size 50 mm SIPLACE D4
11/2007 Edition
47
2.2.3.2 Set-up
: Select a set-up (see screenshot).
: For the PCB conveyor, select "Long board" and enter one of the values in the table under
"Stopper 2 at position" for both processing areas.
2
2
The screenshot below is from SIPLACE HF-series. At HS-60 no stopper can be entered at place-
ment area 2. 2
2
2
The stopper position is not included in the optimization unless the "Use for optimization" box is
checked. 2
Stopper position PCB length Stopper position Offset
pos 1 550 mm 610 mm 242 mm
pos 2 580 mm 640 mm 272 mm
pos 3 610 mm 670 mm 302 mm
Select the set-up
Select Long board
Enter offset value
(e.g. 242 for pos. 2)