D3操作手册 - 第29页
29 Component Feeding Matrix Tray Changer Description For numerous tra y fed com- ponent s we reco mmend an automatic tray cha nge using a matrix tr ay changer (MTC). The MTC set-up is precisely matched t o the place ment…
28
Component Feeding
Waffle-Pack Tray Holder
Description
The waffle-pack tray holder is
a device for holding JEDEC
trays used to supply compo-
nents. The holder is placed
on the component table like
a feeder module and the
waffle-pack trays are
changed manually.
The tray holder set-up is rec-
ommended if there are just a
few component types to be
placed from a waffle-pack
tray.
Technical data
Waffle-pack tray holder for large waffle-pack trays
Dimensions (LxWxH) 425 x 264 x 113 mm³
Locations filled on the
component table
9
Possible positions Locations 2 and 4
Software
Station software
Programming system
SR.602.xx or later
SIPLACE Pro 3.0 or later
Range of placement heads TwinHead, C&P6, C&P12
Waffle-pack tray holder for small waffle-pack trays
Dimensions (LxWxH) 425 x 140 x 113 mm³
Locations filled on the component
table
5
Possible positions Locations 2 and 4
Software
Station software
Programming system
SR.602.xx or later
SIPLACE Pro 3.0 or later
Range of placement heads TwinHead, C&P6, C&P12
Waffle-pack tray holder
29
Component Feeding
Matrix Tray Changer
Description
For numerous tray fed com-
ponents we recommend an
automatic tray change using
a matrix tray changer (MTC).
The MTC set-up is precisely
matched to the placement
sequence in order to opti-
mize the timings and dis-
tances traveled.
Two bins with component
trays move independently of
one another in the vertical
direction until the desired
magazine is within the range
of the feed axis. The horizon-
tal feed axis transports the
tray from the tray supply to
within the range of the place-
ment head. The first maga-
zine is made available as
soon as a PCB moves onto the
PCB conveyor, and valid
panel and set-up data is avail-
able. All other magazine
changes are carried out time-
neutrally during the place-
ment process. The maga-
zines can be refilled without
stopping the machine.
Defective components are re-
turned to the original tray.
Tray supply 2
Tray supply 1
Feed axis 1
Feed axis 2
30
Component Feeding
Matrix Tray Changer
Technical Data
Tray supply 1 (XL) Tray supply 2
Dimensions
Length x width
Height
1305 x 600 mm²
1490 mm for 830 mm PCB transport height
1560 mm for 900 mm PCB transport height
1590 mm for 930 mm PCB transport height
1640 mm for 950 mm PCB transport height
Weight (basic equipment)
approx. 500 kg (with PCB magazines
and waffle-pack tray holders)
Weight (fully equipped)
approx. 534 kg (with components)
Weight (moving mass)
approx. 80 kg approx. 43.5 kg
PCB magazine size (L x W x H)
391.2 x 305.6 x 93.3 mm³ 352.7 x 154.8 x 133.8 mm³
PCB magazine weight
(fully equipped)
(without waffle-pack tray holders)
approx. 11 kg
approx. 1.7 kg
approx. 7.5 kg
approx. 1.35 kg
Waffle-pack tray holder weight
850 g 150 g
Waffle-pack tray holders dimensions
(L x W x H)
386.5 x 295.8 x 11.1 mm³ 371 x 146 x 10.1 mm³
Distance from PCB magazine to maga-
zine
96 mm 135 mm
Distance from level to level
12 mm 11.8 mm
Vertical travel
444 mm
(1st to 30th waffle-pack
tray holder)
511.2 mm
(1st to 40th waffle-pack tray
holder)
Horizontal travel between
outgoing and pick-up position
approx. 647 mm approx. 638 mm
Storage capacity
30 XL waffle-pack tray hold-
ers with 60 JEDEC or
30 special magazines of
maximum size
40 waffle-pack tray holders
with
40 JEDEC waffle-pack trays
Changeover time (over 5 levels)
approx. 2 sec approx. 1.5 sec
Max. height of component and waffle
tray, including tolerances
all levels filled
one level free
two levels free
8.5 mm
19.5 mm
31.5 mm
8.5 mm
19.5 mm
–