D3操作手册 - 第50页
50
49
Option List for the SIPLACE D3
Available options Notes
Transport height (900, 930, 950) X
Single conveyor, stationary side right X
Single conveyor, stationary side left X
Dual conveyor, fixed side right X
Dual conveyor, fixed side left X
PCB alignment, single conveyor X
PCB alignment, dual conveyor X
Long board option X
Wide board configuration X
PCB barcode scanner, 1D X
PCB barcode scanner, 2D X
PCB barcode scanner, assembly kit X
Magnetic pin support X
12-nozzle Collect & amp;Place head X
High-resolution component camera, type 29 (for C&P12) X
Component sensor, C&P12 X
01005 package
a
X
0201 package X
6-nozzle Collect & Place head X
TwinHead X in placement area 2 only
Stationary P&P component camera, type 25, 16 x 16, digital X for the TwinHead only
Coplanarity module X for the TwinHead only (at location 3)
Nozzle changer (according to the head) X
Nozzle changer, 2nd row (depends on head) X
Reject bin sensor X
SIPLACE component changeover table X
Dip module X
External power supply for the component changeover table X
Compressed air distributor, bulk case feeder modules X
Tape reel holder, 3 x 8 mm feeder module, V2 X
Tape reel holder adapter plate X
Feeder module cover flap X
Feeder module fixing X
Waffle-pack tray holder X can also be used at locations 2 and 4
Setup Center
b
X
Splice detection, table controller
b
X
110/208 V conversion kit X
Vacuum pump X not possible on the TwinHead
Vacuum pump connection kit X
SIPLACE matrix tray changer (MTC2) X at location 2 only
Productivity lift X max. PCB width: Single track 460 mm
Double track 216 mm
max. CO height: 17 mm on the underfloor section
a) from 04/2007
b) from 09/2006
50
51