5OM-1286-007_w - 第23页
Safety Precautions Safe-12 AJQE-ID Alert Indications described as " CAUTION " Alert Description Related Items Avoid hand and finger injuries. • Be careful to avoid hand and finger injuries when closing the covers…
Safety Precautions
Safe-11
AJQE-ID
Alert Indications described as " WARNING " (continued)
Alert Description Related Items
Pay close attention to the cutter blade during the maintenance
work.
•
Lack of attention will result in a hand injury, etc.
•
Be sure to attach the fixing jig to the cut unit during the
maintenance work for safety purposes.
"3.3.6", "4.3" and
"4.4" in "Chapter 1
(Vol. 4)"
0606-005
WARNING
Safety Precautions
Safe-12
AJQE-ID
Alert Indications described as " CAUTION "
Alert Description Related Items
Avoid hand and finger injuries.
•
Be careful to avoid hand and finger injuries when closing the covers
(door type).
•
Hold the handgrip firmly and open or close the cover (door type)
slowly.
"2.2.3" in
"
Ch
apter 1 (Vol. 1)"
When the green lamp of the light tower is ON or flickering (ON and
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
"2.3.2" in
"
Ch
apter 1 (Vol. 1)"
Before performing any work, confirm that the "LOCK" lamp on
the operation panel is "ON" (green).
•
If the "LOCK" lamp is not turned on, the machine can
be operated at any time from both front and rear sides,
endangering the operators around the machine.
•
Before performing any setup work, etc., with the machine
powered, be sure to press the [PNL CHANGE] button on either
t
he front or the rear operation panel and confirm that the [LOCK]
lamp is turned "ON".
"2.3.4" in
"Ch
apter 1 (Vol. 1)"
Be sure not to detach the transparent cover located above the
conveyor.
Otherwise, part of your clothes or hair might get caught by
the conveyor, causing an injury
.
"2.4.2" in
"Ch
apter 1 (Vol. 1)"
Strong Magnetism
•
Do not bring any metal of high magnetizability close to this.
Otherwise, such metal will easily be magnetized and attracted,
causing an injury to the operator or breakdown of the machine.
•
Do not bring any object such as a magnetic card and a watch
close to the machine.
The data of the magnetic card might be cleared or a watch, etc., may
be damaged due to the strong magnetism.
"2.4.4" in
"
Ch
apter 1 (Vol. 1)"
0606-005
CAUTION
Safety Precautions
Safe-13
AJQE-ID
Alert Indications described as " CAUTION " (continuted)
Alert Description Related Items
When a tape feeder is attached or detached, be sure not to
drop it.
Otherwise, a foot injury will result or the feeder itself may be
damaged.
Carefully handle each feeder one by one and do not drop any
.
"2.4.8" in
"C
h
apter 1 (Vol. 1)"
"2.1" in
"Chapter 2 (Vol. 1)"
"2.4" in
"Chapter 3 (Vol. 1)"
Hazardous to your hands and fingers!
•
Be sure to hold the handle to move the bank feeder change cart.
•
While attaching the handle slides, be sure to prevent your fi
ngers
from getting jammed.
"2.4.8" in
"Ch
apter 1 (Vol. 1)"
"2.4" in
"Chapter 3 (Vol. 1)"
Watch your step!
•
Be careful not to hit your foot against the cart while moving the bank
feeder change cart.
•
T
ry to put on footwear that can protect your toes and have slip- and
puncture-resistance soles (thickness: 10 mm or more) while working.
"2.4.8" in
"Ch
apter 1 (Vol. 1)"
"2.4" in
"Chapter 3 (Vol. 1)"
Do not put your hand in the moving area while the feeder base is
moving up or down.
While the LED of a [FEEDER READY] switch is being flickering, it
indicates that the corresponding feeder base is moving up and down.
"2.4.8" in
"Ch
apter 1 (Vol. 1)"
While attaching the handle slides, be sure to prevent your fingers
from getting jammed.
"2.4.8" in
"Ch
apter 1 (Vol. 1)"
"3.3" in
"Chapter 1 (Vol. 4)"
Be sure to firmly hold the handle to bend and extend.
Otherwise,
the handle will fall, causing an injury
.
Pay special attention to the handle's up/down sliding portion to prevent
fingers from being pinched.
"2.4.8" in
"C
h
apter 1 (Vol. 1)"
"2.4" in
"Chapter 3 (Vol. 1)"
"3.3" in
"Chapter 1 (Vol. 4)"
0701-006
CAUTION