5OM-1286-007_w - 第39页
Safety Precautions Safe-28 AJQE-ID No. Alert Labels and Description (1 1) Description Do not drop a feede r . Otherwise, a foot injury will result or the feeder itself may be damaged. Carefully handle each feeder one b…
Safety Precautions
Safe-27
AJQE-ID
No. Alert Labels and Description
(8)
Description
When a cover (door type) is opened or closed, be sure to hold the grip firmly and
slowly move the cover up or down. Otherwise, your hand and fingers might get
caught in the door and get injured.
(9)
Description
Strong permanent magnets are used in the moving sections of the X/Y beam.
•
Do not bring any metal of high magnetizability close to this. Otherwise, such
metal will easily be magnetized and attracted, causing an injury to the operator or
breakdown of the machine.
•
Do not bring any object such as a magnetic card or a watch close to the magnets.
Such an object can easily be affected by the magnetism. Otherwise, the data of
the magnetic car might be cleared or a watch, etc., may be damaged due to the
strong magnetism.
(10)
Description
Be sure to hold the handle to move the bank feeder change cart.
Do not put your hand in the moving area while the feeder base is moving up or
down.
While the LED of a [FEEDER READY] switch is flickering, it indicates that the
feeder base is moving upward or downward.
0701-006
Safety Precautions
Safe-28
AJQE-ID
No. Alert Labels and Description
(11)
Description
Do not drop a feede
r. Otherwise, a foot injury will result or the feeder itself may be
damaged.
Carefully handle each feeder one by one and do not drop any
.
(12)
Description
The machine should be operated with the covers being attached. Otherwise, part of
your body may be trapped in the moving mechanisms, causing an injury.
(13)
Description
Before maintenance work, shut off the power breaker and lock it with the padlock.
Even when the power breaker is set to
"OFF", the primary line is powered, making
it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before maintenance
work.
0701-006
Safety Precautions
Safe-29
AJQE-ID
No. Alert Labels and Description
(14)
Description
The grounding line (PE) must be connected first to the leading-in section of the
primary power supply
.
Imperfect grounding will cause an electric shock.
(15)
(15-1)
(15-2)
(15-3)
Description
This label indicates that high voltage is applied to the area.
Residual voltages may remain behind for a few minutes in the internal devices of
the machine after power interception.
Before performing maintenance work, wait until the char
ge lamps of the DC power
supply and the servoamplifi
er go "OFF" in 10 minutes or more after the power
breaker is set to "OFF".
0701-006