5OM-1286-007_w - 第40页
Safety Precautions Safe-29 AJQE-ID No. Alert Labels and Description (14) Description The grounding line (PE) must be connected first to the leading-in section of the primary power supply . Imperfect grounding will cause…
Safety Precautions
Safe-28
AJQE-ID
No. Alert Labels and Description
(11)
Description
Do not drop a feede
r. Otherwise, a foot injury will result or the feeder itself may be
damaged.
Carefully handle each feeder one by one and do not drop any
.
(12)
Description
The machine should be operated with the covers being attached. Otherwise, part of
your body may be trapped in the moving mechanisms, causing an injury.
(13)
Description
Before maintenance work, shut off the power breaker and lock it with the padlock.
Even when the power breaker is set to
"OFF", the primary line is powered, making
it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before maintenance
work.
0701-006
Safety Precautions
Safe-29
AJQE-ID
No. Alert Labels and Description
(14)
Description
The grounding line (PE) must be connected first to the leading-in section of the
primary power supply
.
Imperfect grounding will cause an electric shock.
(15)
(15-1)
(15-2)
(15-3)
Description
This label indicates that high voltage is applied to the area.
Residual voltages may remain behind for a few minutes in the internal devices of
the machine after power interception.
Before performing maintenance work, wait until the char
ge lamps of the DC power
supply and the servoamplifi
er go "OFF" in 10 minutes or more after the power
breaker is set to "OFF".
0701-006
Safety Precautions
Safe-30
AJQE-ID
No. Alert Labels and Description
(16)
Description
The inside of the recognition light source unit becomes high in temperature.
Before replacing the lamp with a new one, set the power breaker to "OFF" and
leave the unit intact until it cools down sufficiently.
(17)
Description
Be sure to firmly hold the handle to bend and extend. Otherwise, the handle will
fall, causing an injury.
(18)
Description
While attaching the handle slides, be sure to prevent your fingers from getting
jammed.
0701-006