5OM-1286-007_w - 第5页
2 AJQE-ID About the Instruction Manual This instruction manual is divided into the following six volumes (booklets) on subjective basis. V olume 1: Guide This describes the basic usage of the machine and is prepared for …
1
AJQE-ID
Before Use
We are grateful to you for purchasing Hitachi direct-drive modular mounter (chip
mounter).
This machine can be used to place the chip-type electronic components on PCBs.
This instruction manual describes the functions, handling, and operations of the machine
for those who have finished the basic training of the chip mounter.
Before operating the machine, please read this instruction manual carefully to fully
understand the instructions and precautionary measures for safety purposes.
After reading through this manual, please use this manual as an occasional reference and
keep it within reach.
0606-005
2
AJQE-ID
About the Instruction Manual
This instruction manual is divided into the following six volumes (booklets) on subjective
basis.
Volume 1: Guide
This describes the basic usage of the machine and is prepared for those who will
read this manual for the first time or have never used any direct-drive modular
mounter.
[Coverage]
"Checking Items", "Safety Precautions", "Guide Map for Machine and
Operations", "Functions", Preparatory and Ending Procedures of
Automatic
Operation", "Countermeasures against Simple Problems", "Specifications", and
"Glossary"
Volume 2: Operation
This describes the general items related to machine operations for those who have
read "Volume 1: Guide".
[Coverage]
"Checking Items", "Safety Precautions", "Automatic Operation", "Program/
Product Change Operations", "Operation Check", "Device Management",
"Maintenance/Adjustment", etc.
Volume 3: Programming and Machine Data
This describes various data required to be understood by the programmer (a person
who creates pattern programs) and the supervisor (a person authenticated as a
supervisor).
[Coverage]
"Checking Items", "Safety Precautions", "Pattern Programs", "Component
Library Data", "Management Data", "Nozzle Data", "System Setup Data", etc.
Volume 4: Maintenance & Troubleshooting
This describes the periodic maintenance and troubleshooting for the machine
operators.
[Coverage]
"Checking Items", "Safety Precautions", "Periodic Maintenance", "List of
Consumables and Servicing Parts", "Remedial Measures after "ERROR"
Window", etc.
0606-005
3
AJQE-ID
Volume 5: Pneumatic and Machine Diagrams
This provides various kinds of material such as pneumatic and electrical circuit
diagrams, etc.
[Coverage]
"Checking Items", "Safety Precautions", "Pneumatic Diagrams", "Parts
Location", "Electrical Circuit Diagrams", etc.
Component Library
This includes an explanation of component library data and how to create it.
First of all, please read the paragraphs in "Caution and Warning" and "Safety Precautions"
(first part of this manual).
Identifying Icons in Manual
Notice
This icon represents an important precautionary or a regulatory item.
Note
This icon should be identified as an item required for correct operations of the
machine.
Reference
This icon prompts the operator to refer to the described item.
Procedure
This icon prompts the operator to follow the operational procedures.
Refer to the glossary (Vol. 1) for the definitions of basic words (X/Y Beam Section, Cover
Section, etc.) used in this manual.
0606-005