00197855-04_JC_PM_WF4_SX12_EN - 第44页
12 WF4 SX1/2 Check and clean the gas pressure shock absorber. 1 min 2 / 2 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e n a n c e …
12 WF4 SX1/2 Check and clean the gas pressure shock absorber. 1 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C3
www.asm-smt.com
1 Clean the sliding surface of both shock ab-
sorbers.
2 Open and close the cover several times. 3 Check if any oil is visible at the sliding sur-
face.
4 If NOT proceed with step 6. 5 If YES contact service for exchange. 6 Repeat steps 1 to 5 for the second ab-
sorber.
12 WF4 SX1/2 Check and clean the gas pressure shock absorber. 1 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C3
www.asm-smt.com
7 Open the cover 30 cm. 8 The cover should be pulled back. 9 If OK go to Step 11.
10 If not OK contact Service. 11 Repeat all steps at the other cover.
13 WF4 SX1/2 Clean and grease the nozzle changer TwinHead. 1 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C4, C31
www.asm-smt.com
1 Move the gantry over the transport. 2 Remove all nozzles. 3 Clean the nozzle garage.
4 Ensure to properly clean the spring lock. 5 Return all nozzles.