03217917-01-01E By DEK Technical Reference Manual Vol 1_enPDFA - 第15页
2 INTRODUCTION 2.2 MANUAL STRUCTURE TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 15 2.2 MANUAL STRUCTURE The Technical Reference Manual is composed around four defined areas: ● Manual Introduction and Overview ● Pri…
2 INTRODUCTION
2.1 DOCUMENTATION
14 TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019
2.1.2.2 Hard Disk
The following technical information is provided on the machine PC hard disk via the Instinctiv Help
system:
●
Instruction Guide (in all available languages)
●
Operator Manual (in all available languages)
●
Maintenance Manual (in all available languages)
●
Installation Manual
●
Technical Reference Manual
●
Electrical Drawings
●
Machine Tutorials
●
Consumable Replenishment Tutorials
2.1.3 Hard Copy
The following documentation is included in hard copy format with the machine:
●
Instruction Guide (in language specified by customer)
●
Operator Manual (in language specified by customer)
●
Maintenance Manual (in language specified by customer)
●
Installation Manual
●
Electrical Drawings (A3 format)
2.1.3.1 Additional Manuals
The following hard copy manuals are available to purchase by the customer:
●
Instruction Guide (in language specified by customer)
●
Operator Manual (in language specified by customer)
●
Maintenance Manual (in language specified by customer)
●
Installation Manual
●
Electrical Drawings (A3 format)
●
Technical Reference Manual
2 INTRODUCTION
2.2 MANUAL STRUCTURE
TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 15
2.2 MANUAL STRUCTURE
The Technical Reference Manual is composed around four defined areas:
●
Manual Introduction and Overview
●
Printer Electrical and Electronics Areas
●
Printer Modules
●
Miscellaneous Information
Based upon the areas above, the manual is divided into chapters. A listing of all chapters is de-
tailed in the contents pages of this manual.
2.2.1 Chapter Structure
Chapter Structure The structure of each chapter within the manual may vary dependent upon lay-
out of information, (with the exception of module chapters).
All printer module chapters are given a common generic structure, enabling the user to become fa-
miliarized with a standard module information layout. The breakdown of a typical module chapter is
detailed in the table below:
Section Heading Description
Overview Includes a diagrammatic overview with a description of the
module operation, detailing relevant sequences and/or po-
sitional information
Pneumatic and/or Electrical Schem-
atic
Block diagram detailing the electrical system, including sig-
nals, components etc, (and pneumatics if necessary)
Adjustments and Settings Provides information on any adjustment and/or setting in
order to enable correct module functionality
Replacement Procedures Where applicable, details technical instruction for the re-
placement of individual components within the module
Calibrations Where applicable, describes how to calibrate the module
following installation, adjustment or replacement proced-
ures
2 INTRODUCTION
2.3 CONVENTIONS
16 TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019
2.3 CONVENTIONS
2.3.1 General
The manual follows a logical method of portraying information to the user. This philosophy is con-
sistent across the complete range of manuals.
The following briefly describes the conventions typical of any DEK technical publication.
2.3.2 Page Layout
An example of a typical chapter page layout is illustrated below:
1
INTRODUCTION
1.2
MACHINE DESCRIPTION
INSTRUCTION GUIDE E by DEK 07/2017 9
Fig. 3: Next Service Due Label
On subsequent service visits the engineer replaces the label.
1.2 MACHINE DESCRIPTION
The DEK printing machine is a mass imaging device used to apply printable material to substrates
in a controlled manner using a feedback system. Constructed using a torsional rigid machine base
frame, it provides an exceptionally stable print platform, with a high intrinsic resonance frequency.
Coupled with a digital camera system mounted on precision guides delivery longevity and long last-
ing accuracy.
1.2.1 Intended Use
The printer may only be used as a mass imaging device used to apply printable material to PCBs
or substrates. Only ASM AS spares must be used to service the machine.
Using the printer as prescribed also includes the compliance with all instructions on the machine's
GUI and documentation.
For the printer to operate correctly and reliably, it must have been transported, installed, assembled
correctly and must be operated within its specification and environmental envelope.
In the case of incorrect usage, ASM Assembly Systems Singapore Pte Ltd will not assume liability
for any damage which occurs and will not guarantee the correct and proper functioning of machine
or machine components.
1.2.2 Electronic
1.2.2.1 DVD
The following technical information is provided on DVD:
●
Instruction Guide (in all available languages)
●
Operator Manual (in all available languages)
●
Installation Manual
●
Technical Reference Manual
●
Maintenance Manual
●
Electrical Drawings
●
Machine Tutorials
●
Consumable Replenishment Tutorials
1
2
3
4
5
6
7
8
9
1 Company Logo 6 Subject Subtitle
2 Figure 7 Subject Title
3 Figure Number and Title 8 Main Subject Title
4 Page Number 9 Chapter Number and Title
5 Manual Type / Subject / Edition