03217917-01-01E By DEK Technical Reference Manual Vol 1_enPDFA - 第180页
13 ADJUSTABLE WIDTH STENCIL MOUNT 13.1 OVERVIEW 180 TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 13.1.1 Semi-Auto Stencil Loader 1 2 3 4 5 6 7 8 1 Stencil Loader Mechanism 5 Stencil Loader Actuator Retracted Sensor …
13 ADJUSTABLE WIDTH STENCIL MOUNT
13.1 OVERVIEW
TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 179
1
6
5
4
3
2
1 Stencil Clamp Pneumatic
Cylinder
4 Stencil Clamp Lever
2 Stencil Clamp 5 Pivot Point
3 Stencil Clamp Lever Actuator Bar 6 Stencil Clamp Lever Actuator Bar
Guide
To clamp the stencil in the AWSM, the stencil clamp pneumatic cylinder is extended pushing the
lever actuator bar towards the front of the printer. This operates the clamp levers which pivots the
stencil clamps downwards applying pressure on the top of the stencil frame.
The method used for achieving correct position of the stencil within the AWSM is Semi-Auto Stencil
Loader.
13 ADJUSTABLE WIDTH STENCIL MOUNT
13.1 OVERVIEW
180 TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019
13.1.1 Semi-Auto Stencil Loader
1 2
3
4
5
6
7
8
1 Stencil Loader Mechanism 5 Stencil Loader Actuator Retracted
Sensor
2 Squeegee Drip Tray 6 Stencil Loader Actuator
3 Stencil Stop 7 Squeegee Drip Tray Actuator
4 Stencil Loader Actuator Extended
Sensor
8 Drip Tray Retracted Sensor
The semi-auto stencil loader (S-ASL) positions the stencil after the operator has placed it in the
chase. The stencil loader mechanism is incorporated into the squeegee drip tray mechanism which
is secured beneath the print carriage, therefore the drive is provided by the print carriage drive sys-
tem.
13 ADJUSTABLE WIDTH STENCIL MOUNT
13.1 OVERVIEW
TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 181
When Load Screen is selected on the MMI, the S-ASL is driven forward by the print carriage to the
correct load position. The operator opens the printhead cover and loads a stencil into the printer
until it abuts the S-ASL lever. This is the correct load position for the stencil.