03217917-01-01E By DEK Technical Reference Manual Vol 1_enPDFA - 第34页
3 SAFETY FEATURES 3.4 HIGH VOLTAGE PROTECTION 34 TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 M36SK03 M36SK01 M36SK02 M36SK04 M36SK07 M36SK05 M36SK06 M36PL08 M36SK09 M36SK10 M36SK1 1 M36SK12 M36SK13 M36SK14 M36SK15 …
3 SAFETY FEATURES
3.4 HIGH VOLTAGE PROTECTION
TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 33
1
1
Earth Studs and Labels on the Print Carriage
1 Earth Studs and Labels
1
Earth Studs and Labels on the Vacuum Pump
1 Earth Studs and Labels
3 SAFETY FEATURES
3.4 HIGH VOLTAGE PROTECTION
34 TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019
M36SK03
M36SK01
M36SK02
M36SK04
M36SK07
M36SK05
M36SK06
M36PL08
M36SK09
M36SK10
M36SK11
M36SK12
M36SK13
M36SK14
M36SK15
M36SK16
M36SK17
M36SK18
M36SK19
M36PL20
M36SK21
M36SK22
M36SK23
M36SK24
M36SK25
M36PL26
1
Typical Module Earth Stud and Label
1 Earth Studs and Labels (PC/M27/M36/M37/M39)
3 SAFETY FEATURES
3.5 LOCKOUT
TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 35
3.5 LOCKOUT
3.5.1 Electrical Lockout
WARNING
LETHAL VOLTAGE. DANGEROUS VOLTAGES EXIST IN THIS EQUIPMENT.
ENSURE ALL ELECTRONIC COVERS AND MAIN MACHINE COVERS ARE FITTED
BEFORE OPERATING THIS EQUIPMENT.
Electrical lockout of the printer is achieved by applying a padlock, or any other suitable locking
device, through the body and the switch shroud of the mains isolator switch. This can only be
achieved when the mains isolator switch is in the OFF position.
To electrically lockout the printer, carry out the following procedure:
► Close down the printer software.
► Switch the mains isolator (2) to the OFF position.
► Pull the lockout tab out (1).
► Fit a padlock or suitable locking device through the lockout point.
1
2
NOTE
Switch shown in the OFF position.
► This completes the electrical lockout.