03217917-01-01E By DEK Technical Reference Manual Vol 1_enPDFA - 第40页

4 COVERS 4.1 PRINTER COVERS 40 TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 4.1.1.5 Upper Rear Panel To remove the upper rear panel, carry out the following: ► Using a 4mm Allen key, undo the four captive screws (1)…

100%1 / 292
4 COVERS
4.1 PRINTER COVERS
TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 39
4.1.1.3 Front Panel
To remove the front panel, carry out the following:
► Open the front printhead cover.
► Using a 4mm Allen key, undo the two captive screws (1) located on the inside of the panel.
1
► Tilt the top of the panel away from the printer and lift the panel clear of the location pins that
locate the panel to the printer frame, taking care not to damage the earth cable.
4.1.1.4 Lower Rear Panel
To remove the lower rear panel, carry out the following:
► Using a 4mm Allen key, undo the four captive screws (1).
1
1
► Tilt the top of the panel away from the printer and lift the panel clear of the location pins that
locate the panel to the printer frame, taking care not to damage the earth cable.
4 COVERS
4.1 PRINTER COVERS
40 TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019
4.1.1.5 Upper Rear Panel
To remove the upper rear panel, carry out the following:
► Using a 4mm Allen key, undo the four captive screws (1).
1
1
► Lift the panel clear of the printer frame, taking care not to damage the earth cable.
4.1.1.6 Safety Covers
Safety covers are fitted to the side panels to protect personnel from inadvertent access to the
board entry/exit ports.
To remove the safety cover, remove the two securing screws (1).
1
4 COVERS
4.1 PRINTER COVERS
TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 41
4.1.1.7 Rear Corner Panels
To remove either of the rear corner panels, carry out the following:
► Remove the Left Hand Safety Cover (as detailed previously).
► Remove the Right Hand Safety Cover (as detailed previously).
► Using a 4mm Allen key, undo the appropriate four captive screws (1).
► Lift the panel clear of the printer frame, taking care not to damage the earth cable.
1