03217917-01-01E By DEK Technical Reference Manual Vol 1_enPDFA - 第49页

5 MACHINE OVERVIEW 5.1 MODULE OVERVIEWS TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 49 5 MACHINE OVERVIEW 5.1 MODULE OVERVIEWS This chapter describes the function and the purpose of each of the printer modules, the…

4 COVERS

4.1 PRINTER COVERS

48 TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019

5 MACHINE OVERVIEW

5.1 MODULE OVERVIEWS

TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 49

MACHINE OVERVIEW

5.1 MODULE OVERVIEWS

This chapter describes the function and the purpose of each of the printer modules, their location

within the printer and the relationship and interaction between modules, if applicable.

For detailed information regarding each module refer to the relevant module chapter in this manual.

5.1.1 Man Machine Interface (MMI) Module

The MMI module enables communication and interaction between the user and the machine.

1 Tricoloured Beacon 5 Control Button

2 Control Button 6 Mains Isolator Switch

3 Monitor 7 Emergency Stop (E Stop)

4 Keyboard/Trackball Mouse 8 Control Button

5 MACHINE OVERVIEW

5.1 MODULE OVERVIEWS

50 TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019

5.1.2 Power Supply Module

The M37 power supply enclosure fulfils the following functions:

●

Transform and rectify the mains voltage supply to the voltages required by the electrical sys-

tems throughout the machine.

●

Electrical safety – achieved by the use of emergency stop safety circuits (E Stop). When an E

Stop is activated, power is removed from selected areas of the machine.

5.1.3 Printer Control Module

The M36 machine control enclosure is the central hub controlling machine motion. Machine control

also consists of I/O nodes throughout the machine connected to the machine control enclosure us-

ing a CAN Bus.

Machine control is an interface between the software and:

●

Stepper Motors

●

Servo Motors

●

Sensors

●

Switches

●

Solenoids

●

Lamps

5.1.4 Printer PC Module

The machine PC enclosure is the master controller of the machine. Issuing sequential control com-

mands to slave systems via the machine control enclosure, the PC analyses the feedback signals

and issues further commands to ensure the correct operation and safety of the machine.

1 Machine PC Enclosure 3 Machine Power Supply Enclosure

2 Machine Control Enclosure