CP-7[732-742]-series Mechanical Reference(2.9E)

Manual Updat e Notice The fol lowing ma nual has bee n revised and re -rele ased: Manual title: CP-7- series Me chanical Refer ence Manual number (u pdated edi tion ): MEC-C P7S-2.9E Manual number (p revious edition ): M…

Manual Update Notice

The following manual has been revised and re-released:

Manual title: CP-7-series Mechanical Reference

Manual number (updated edition): MEC-CP7S-2.9E

Manual number (previous edition): MEC-CP7S-2.8E

Date of issue: December 5, 2003

The main changes that have been made are detailed in the table below.

Part and chapter Summary of changes

Part 3, Chapter 1 3.1.5

A warning was added to the camera cover glass

cleaning instructions.

Part 3, Chapter 2 3.2

Instructions for three grease nozzles exclusive to

the CP-7 series were added. ST3 nozzle clutch

LM block, ST13 parts reject unit LM block,

NZ-axis LM block.

Other minor changes have been made throughout

the manual.

Note:

For a copy of the entire manual, contact your nearest Fuji sales representative

or send an e-mail request to the address below.

E-mail : intnetqst@fuji.co.jp

CP-7-series

Mechanical Reference

CP-732E

CP-742ME

CP-742E

MEC-CP7S-2.9E

Copyrights

All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This manual

may not, in whole or in part, be reproduced by any means (electronic, mechanical or otherwise), or

reused in any way, without the prior written permission of Fuji Machine Manufacturing Co., Ltd.

Trademark Rights

is a trademark of Fuji Machine Manufacturing Co., Ltd., and registered in the

following countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Indonesia,

Ireland, Italy, Japan, Korea, Luxembourg, the Netherlands, Portugal, Spain, Sweden, the U.K., and the

U.S.A.

Windows NT is a trademark of Microsoft Corporation, USA.

UNLHA(32).DLL is a freeware product created by Micco.

Warranty and Liability

Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for situations that may arise due to

any of the following:

• The use of third party parts.

• The use of non-genuine Fuji parts.

• Incorrect settings made by the customer.

• Improper use of Fuji equipment.

Notice

Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for any situations that may arise as a

result of the use of this manual.

Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual without

notice.

Every effort has been made to ensure that this manual is correct in every detail. However, please

contact Fuji in the unlikely event that errors or omissions are detected.