CP-7[732-742]-series Mechanical Reference(2.9E) - 第100页
2.5 Lubricating the Cam Box Arrow marks in the illustration indicate lubrication points. Black arrows indicate points where a grease gun is required. Caution: Do not lubricate the shaft on the air cylinder. Note: Lubrica…
2.4 Lubricating the Tape Advance Link
Arrow marks in the illustration indicate lubrication points.
C7SM3014b
(14)
(14)
(15)
(15)
(16)
(16)
(15)
1 ST
AFC grease
Daphne Exponex No. 2
AFC grease
T004b
Lubrication points
Schedule
Types of lubricant
14
15
16
Monthly
Monthly
Monthly
Tape feed lever
Shaft
Joint
Part 3 Chapter 2 Lubrication
Edition 2.9 3-2-8 CP-7 series Mechanical Reference
2.5 Lubricating the Cam Box
Arrow marks in the illustration indicate lubrication points.
Black arrows indicate points where a grease gun is required.
Caution: Do not lubricate the shaft on the air
cylinder.
Note: Lubrication of (23) requires a special grease nozzle.
Refer to the next page for details.
C7SM3015b
ST2, 8, 9, 10 rod
(17)
(17)
(21)
(20)
(22)
(17)
(17)
(17)
(17)
(24)
(19)
(18)
(18)
(19)
(23)
Shaft
Daphne Exponex No. 2
Daphne Exponex No. 2
Daphne Exponex No. 2
Daphne Exponex No. 2
Daphne Exponex No. 2
AFC grease
T005b
Lubrication points
Schedule
Types of lubricant
17
Monthly
Cam
18
Monthly
Cam lever pivot (7 points)
19
Monthly
Cam lever bearing
20
Monthly
NZ-axis ball screw
21
Every 3 months
NZ-axis LM rail
22
Every 3 months
Monthly
NZ-axis holder
NZ-axis LM block
23
24
Every 3 months
-axis connecting pin
Daphne Exponex No. 2
AFC grease
Part 3 Chapter 2 Lubrication
Edition 2.9 3-2-9 CP-7 series Mechanical Reference
C7SM3114
Connect the hose to the special grease nozzle and inject
grease into the NZ-axis LM block.
NZ-axis LM block
Special grease nozzle
Hose
ADGPJ818✽
Special grease nozzle for
the NZ-axis LM block
Part 3 Chapter 2 Lubrication
Edition 2.9 3-2-10 CP-7 series Mechanical Reference