CP-7[732-742]-series Mechanical Reference(2.9E) - 第102页

2.6 Lubricating the T ape Cutter Arrow marks in the illustration indicate lubrication points. C7SM3016b (27) (27) 1 ST (25) (26) (25) (25) (25) (27) Note: Apply AFC grease to the outside surface of the thrust bearing. Di…

C7SM3114

Connect the hose to the special grease nozzle and inject

grease into the NZ-axis LM block.

NZ-axis LM block

Special grease nozzle

Hose

ADGPJ818✽

Special grease nozzle for

the NZ-axis LM block

Part 3 Chapter 2 Lubrication

Edition 2.9 3-2-10 CP-7 series Mechanical Reference

2.6 Lubricating the Tape Cutter

Arrow marks in the illustration indicate lubrication points.

C7SM3016b

(27)

1 ST

(25)

(26)

(25)

(27)

Note: Apply AFC grease to the outside surface

of the thrust bearing.

Disassembly is not required.

Daphne Exponex No. 2

T006b

Lubrication points

Schedule

Types of lubricant

Weekly

Monthly

Weekly

Movable cutter

Cam follower

AFC grease

Thrust bearing

Part 3 Chapter 2 Lubrication

Edition 2.9 3-2-11 CP-7 series Mechanical Reference

2.7 Lubricating the Rod Ends

Arrow marks in the illustration indicate lubrication points.

Black arrows indicate points where a grease gun is required.

C7SM3017a

(28)

Rod end

(with a grease fitting)

14 ST

Inside of the cam box

T007a

Lubrication points

Schedule

Types of lubricant

Every 3 months

Rod end

Daphne Exponex No. 2

Part 3 Chapter 2 Lubrication

Edition 2.9 3-2-12 CP-7 series Mechanical Reference