CP-7[732-742]-series Mechanical Reference(2.9E) - 第144页
2. Remove the power supply unit and power supply unit cover. The removal procedure varies among different types of power supply unit. 3. Disconnect the UV lamp harness (M1LP3A, 4A) connectors from the power supply unit. …
Note) The machine X-No. is indicated on the sticker on the out conveyor.
Procedure
WARNING
• Be sure to switch off the 200V power supply before
beginning this procedure.
• The spring force may cause the cam axis to rotate if
the cam axis is positioned anywhere other than the
origin position (0 degrees). Always use extreme
care when working inside the machine, as this is a
dangerous area.
1. Disconnect the connectors of the power supply unit.
C7SM3091E
Type 1 Type 2 Type 3
Connector
ConnectorConnector
C7SM3087E
Sticker
Part 3 Chapter 3 Replacing Consumable Parts
Edition 2.7 3-3-24 CP-7 series Mechanical Reference
2. Remove the power supply unit and power supply unit cover. The removal
procedure varies among different types of power supply unit.
3. Disconnect the UV lamp harness (M1LP3A, 4A) connectors from the power supply
unit.
4. Cut the tie wraps used to secure the lamp harness.
C7SM3095E
Tie wraps
C7SM3092E
Connector
(M1LP3A)
Connector
(M1LP3A)
Connector
(M1LP4A)
Connector
(M1LP4A)
Type 1, 2
Type 3
C7SM3089E
Type 1 Type 2
Type 3
Cover
CoverPower supply unit
Power supply unit
Power supply unit
Cover
Part 3 Chapter 3 Replacing Consumable Parts
Edition 2.7 3-3-25 CP-7 series Mechanical Reference
5. Remove the nozzle holders from stations 2, 3, and 4.
Note: Nozzle holders can be removed from other placing heads if necessary.
6. Detach the UV lamps. The fastening bolts differ by machine type.
7. Put the new UV lamps in position and reassemble the remaining parts in the
reverse order of the disassembly procedure. Finally, turn on the machine power
and be sure that the UV lamps turn on.
C7SM3094E
UV lampUV lamp
Bolt
M4 x 10
Bolt
M3 x 6
Bolt
M3 x 8
Bolt
M3 x 8
Type BType A
C7SM3093E
Nozzle holder
Part 3 Chapter 3 Replacing Consumable Parts
Edition 2.7 3-3-26 CP-7 series Mechanical Reference