CP-7[732-742]-series Mechanical Reference(2.9E) - 第244页

3. Insert the forklift so that its left and right forks are the same distance from the machine center. Moreover, the space between the left and right forks should be set as wide as possible. DANGER Do not attempt to perf…

5. Moving the Machine

Precautions when Moving the Machine

When moving a machine, be sure to observe the safety measures described below in

order to avoid accidents.

• Be sure that the workers who are moving the machine are wearing safety shoes

and helmets.

• Prepare the transport path in advance, and be sure that those who are not assisting

in the machine transport are kept out of the area.

• The machine should be moved only by qualified personnel.

• Before moving the machine, attach the machine brackets (red) which were

attached when the machine was delivered. (Attach the brackets in the prescribed

positions.)

• Use a forklift (load capacity of 10 t or higher) which is suitable for the weight of

the machine in question.

Machine weights: CP-732E . . . . . . . .Approx. 4,000 kg

CP-742M . . . . . . .Approx. 4,880 kg

CP-742E . . . . . . . .Approx. 5,850 kg

• Be sure to insert the forklift forks at the prescribed position.

• Use care to avoid bending the leveling bolts.

• If the balance of a lifted machine is unstable, lower the machine immediately.

• Raise and lower the machine slowly to avoid subjecting the machine to shocks.

Transport Procedure

1. Remove all tape feeders, air hoses, and electrical wiring from the machine.

2. Use the machine brackets (red) to secure the XY-table, the in- and out-carriers, and

the D-axes.

Note: If there are no machine brackets available, use rope, etc., to secure the various parts

of the machine to avoid damaging them.

Carrier brackets

Y-axis bracket

X-axis bracket

C7SM5008

Part 6 Chapter 5 Moving the Machine

Edition 2.3 6-5-1 CP-7-series Mechanical Reference

3. Insert the forklift so that its left and right forks are the same distance from the

machine center. Moreover, the space between the left and right forks should be set

as wide as possible.

DANGER

Do not attempt to perform any tasks beneath the lifted

machine.

Note: The forklift should be operated in accordance with the manual provided by the forklift

manufacturer.

<CP-732E>

<CP-742ME>

<CP-742E>

C7SM5010

D-axis bracket

C7SM5009

Part 6 Chapter 5 Moving the Machine

Edition 2.3 6-5-2 CP-7-series Mechanical Reference

4. Using the forklift, lift the machine to a height of 30cm.

5. Transport the machine by forklift to its new location, then lower the machine

slowly onto the leveling sheets or leveling blocks.

For details concerning leveling sheet or leveling block configurations, refer to

Chapter 1 "Leveling The Machine".

Part 6 Chapter 5 Moving the Machine

Edition 2.3 6-5-3 CP-7-series Mechanical Reference