CP-7[732-742]-series Mechanical Reference(2.9E) - 第4页
About This Manual This manual contains important machine system information for the user. The manual content is intended for specialized technicians who are familiar with Surface Mount Technology (SMT). Please read this …
Copyrights
All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This manual
may not, in whole or in part, be reproduced by any means (electronic, mechanical or otherwise), or
reused in any way, without the prior written permission of Fuji Machine Manufacturing Co., Ltd.
Trademark Rights
is a trademark of Fuji Machine Manufacturing Co., Ltd., and registered in the
following countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Indonesia,
Ireland, Italy, Japan, Korea, Luxembourg, the Netherlands, Portugal, Spain, Sweden, the U.K., and the
U.S.A.
Windows NT is a trademark of Microsoft Corporation, USA.
UNLHA(32).DLL is a freeware product created by Micco.
Warranty and Liability
Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for situations that may arise due to
any of the following:
• The use of third party parts.
• The use of non-genuine Fuji parts.
• Incorrect settings made by the customer.
• Improper use of Fuji equipment.
Notice
Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for any situations that may arise as a
result of the use of this manual.
Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual without
notice.
Every effort has been made to ensure that this manual is correct in every detail. However, please
contact Fuji in the unlikely event that errors or omissions are detected.
R
About This Manual
This manual contains important machine system information for the user.
The manual content is intended for specialized technicians who are familiar with Surface
Mount Technology (SMT).
Please read this manual carefully in order to ensure safe and efficient machine operation.
This manual has been written specifically for the CP-732E, CP-742ME and CP-742E.
Unless otherwise stated, all explanations apply equally to all machines.
Manual Structure
This manual consists of the following eight parts.
Safety Guidelines
Part 1 The Machine
Part 2 Basic Operation
Part 3 Maintenance
Part 4 Adjustments
Part 5 Troubleshooting
Part 6 Setup
Supplementary Information
About This Manual
Edition 2.5 i CP-7 series Mechanical Reference
Page Layout
Each page indicates the part number, chapter number and title, section title , manual
name, page number, and the edition number of the manual.
Part number
The part number to which each chapter belongs is shown on the header on each page.
Chapter number and title
The title of each chapter is shown in the header on each page. Each part may contain one
or more chapters.
Section title
Each chapter may be divided into several sections. The section number is composed of
the number of the chapter to which the section belongs, followed by a sequential number
for each section.
3. Replacing Consumable Parts
3.1 Replacing Nozzles
Point
A nozzle which becomes bent, deformed, or clogged, can cause part pick-up errors and
must be replaced. When replacing a nozzle, use care to avoid losing its internal spring.
Procedure
WARNING
Be sure to turn the main power off before performing this
procedure.
Press and turn
Remove slowly
Nozzle
Spring
C7SM3050
Part 3 Chapter 3 Replacing Consumable Parts
Edition 1.0 3-3-1 CP-7 series Mechanical Reference
Manual name
CP7MF001
Body
Edition number
Page number
Section title
Chapter number and title
Part number
About This Manual
Edition 2.5 ii CP-7 series Mechanical Reference