00196497-07_SM_SXDX12_en - 第179页
Service Work Conveyor 3.6.7 Stoppers and Sensors Conveyor Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02 179 3.6.7.4 3 . 6 . 7 . 4 R e p la c in g t h e S o le n o id V a lv e ( S e n s o r R a il) [ 0 3 0 8 9 8 6 6 - x x ]…
Service Work Conveyor
Conveyor 3.6.7 Stoppers and Sensors
178 Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02
Installation
► Follow the removal instructions in reverse order for installation. Also observe the following instruc-
tions:
► Insert the sockets into the sensor:
1. For sonar sensors on the sensor rail of the right side, you need to position the sockets on the right,
as viewed from the connection side.
2. For sonar sensors on the sensor rail of the left side, you need to position the sockets on the left, as
viewed from the connection side.
► Perform a function check. If this is not successful, you will need to reteach the sonar sensor (see
"4.6.2 Teaching the Sonar Sensor" [ ➙ 278]).
1. Sonar sensor
2. Threaded socket P+F [03096703-xx] (oval)
3. Press-in threaded insert M2 [03088352-xx] (round)
NOTICE
Recommendation: fix socket with adhesive
The sockets do not need to be fixed with adhesive for technical reasons. However, for easier
assembly it may be advisable to fix them like this. This helps to prevent them from falling out or
from the socket being turned with other parts.
► Use a suitable adhesive for fixing. It should be designed to bind plastics with metal (e.g.
Loctite 401 [00805104-xx]).
Service Work Conveyor
3.6.7 Stoppers and Sensors Conveyor
Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02 179
3.6.7.4
3.6.7.4 Replacing the Solenoid Valve (Sensor Rail) [03089866-xx]
Replacing the Solenoid Valve (Sensor Rail) [03089866-xx]
Parts, equipment and tools
▪ Solenoid valve 5/2-micro-way valve 518 [03089866-xx]
Overview
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent unauthorized
reactivation. Observe the instructions in section "1.2 Preparatory Work..." [ ➙ 13].
► Dismantle the sensor rail cover plate over the relevant solenoid valve.
► Unplug the solenoid valve from all electrical and pneumatic connections. You may want to mark the
positions of these connections, to make clear assignment easier later on.
► Loosen the two screws fastening the solenoid valve.
Installation
► Follow the removal instructions in reverse order for installation.
1. Solenoid valve
2. Screws fastening the solenoid valve
3. Compressed air connections
4. Electrical connection
NOTICE!
You do not need to dismantle the sensor rail!
Service Work Conveyor
Conveyor 3.6.8 PCBs
180 Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02
3.6.8
3.6.8 PCBs
PCBs
3.6.8.1
3.6.8.1 Replacing the Conveyor Control TSP400 [03060811-xx]
Replacing the Conveyor Control TSP400 [03060811-xx]
Parts, equipment and tools
▪ Conveyor control TSP400 assembly [03060811-xx]
Overview
Removal
► Use the software to move the conveyor sides into the position which allows you best access. Alter-
natively, you can also loosen the conveyor side clamps on the dual conveyor (see "3.6.1 Loosening
the Conveyor Side Clamps" [ ➙ 143]).
► Switch off the machine, disconnect it from the power supply and secure it to prevent unauthorized
reactivation. Observe the instructions in section "1.2 Preparatory Work..." [ ➙ 13].
► Loosen the screw fastening the cover and remove the cover.
► Unplug all electrical connections to the conveyor control. Mark their positions, to make clear assign-
ment easier later on.
► Loosen the screws fastening the mount and remove the conveyor control from the machine, together
with the bracket.
► Loosen the screws fastening the conveyor control to the mount and take the conveyor control off the
mount.
Installation
► Follow the removal instructions in reverse order for installation. Also observe the following instruc-
tions:
1. TSP400 (under the cover)
2. Screws fastening the covers (1x each, may not apply
for some machine versions)
For an overview of the connectors, switches etc. of the
TSP400, refer to section "5.3 Conveyor" [ ➙ 321].
One TSP400 is fitted on single conveyors; two are fitted
on dual conveyors.
CAUTION
Installation instructions
► If the old conveyor control has an options board, this needs to be refitted on the new con-
veyor control. To do this, unplug all connections for the options board, loosen the fastening
screws and remove the options board.
► Check the firmware and perform a download, if needed. (see "4.9.1 Firmware Download
(SW 70x)" [ ➙ 293]).