00196497-07_SM_SXDX12_en - 第205页
Service Work Conveyor 3.9.10 Replacing the Insert Feeder [03002898- xx] Manual table Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02 205 3.9.10 3 . 9 . 1 0 R e p la c in g t h e I n s e r t F e e d e r [ 0 3 0 0 2 8 9 8 - x …
Service Work Conveyor
Manual table 3.9.9 Replacing the Used Tape Chute
204 Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02
Installation
► Follow the removal instructions in reverse order for installation. Also observe the following instruc-
tions:
Compone nt Supply - Manual Tables - Fitting Pr otections - Color Version
Manual tables only:
WARNING!
There is a risk of injury on manual tables without the two
protections.
► Fit the two protections:
– Protection waste chute DX1/2 left [03094519-xx]
– Protection waste chute DX1/2 right [03094522-
xx]
Service Work Conveyor
3.9.10 Replacing the Insert Feeder [03002898-xx] Manual table
Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02 205
3.9.10
3.9.10 Replacing the Insert Feeder [03002898-xx]
Replacing the Insert Feeder [03002898-xx]
Parts, equipment and tools
Select the right insert feeder:
Removal
► Move the component trolley out of the machine.
► Loosen the screw fastening the guide profile and remove the guide profile.
Installation
► Follow the removal instructions in reverse order for installation. Also observe the following instruc-
tions:
Insert feeder [03002898-xx]
Suitable for:
▪ X-Series component trolley
▪ Component trolley SX1/SX2 (30 or 60 tracks)
▪ Manual table X-Series S
Insert feeder [03085635-xx]
Suitable for:
▪ Manual table DX series
CAUTION
Installation instructions
► Make sure that the insert is aligned properly with the guidance behind it. You must be able
to push feeder modules into the feeder location without edge interference.
Service Work Conveyor
COT insert 3.10.1 Replacing the Unlocking Pins [03088220-xx]
206 Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02
3.10
3.10 COT insert
COT insert
Fragmen t for DX12
3.10.1
3.10.1 Replacing the Unlocking Pins [03088220-xx]
Replacing the Unlocking Pins [03088220-xx]
Parts, Equipment and Tools
▪ Snipe nose pliers [00353833-xx]
Removal
► Dismantle the feeder unlocking device. (See "3.10.3 Replacing the Feeder Unlocking Device 60-fold
[03057772-xx]" [ ➙ 215])
NOTICE
SX- and DX-Series
Unless specified otherwise, all specifications apply to both the SX and DX Series.
▪ SPP feeder unlock device [03088220-xx]
▪ Inside circlip pliers, bent tips J01 [00365186-xx]
► Use the circlip pliers to remove the circlip.
CAUTION!
Under the circlip you will find a spring (2).
Make sure that the circlip and the upper guidance bush-
ing do not blow away and get lost.