00196497-07_SM_SXDX12_en - 第228页
Service Work Conveyor Cutter 3.11.3 Replacing the Articulated Joint on the Short-Strok e Cylinder [03058685-xx] 228 Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02 3.11.3 3 . 1 1 . 3 R e p la c in g t h e A r t ic u la t e d…
Service Work Conveyor
3.11.2 Replacing the Proximity Switch [03061575] Cutter
Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02 227
Installation
► Follow the removal instructions in reverse order for installation. Also observe the following instruc-
tions:
See also
3.11.1 Replacing the Cutter [03063781Sxx] [ ➙ 223]
CAUTION
Installation instructions
► Set the proximity switch to the correct distance with the help of the setting gauge. (see be-
low)
► See also "3.11.7 Connector Assignment on the Cutter" [ ➙ 244]
A Proximity switch setting with setting gauge
on left
B Proximity switch setting with setting gauge
on right
C Proximity switch setting with setting gauge
on left.
The setting gauge can also be used from
below.
D Setting gauge
1 Position "in" (S2, S4) 2 Cutter stopper
3 Position "out" (S1, S3)
Service Work Conveyor
Cutter 3.11.3 Replacing the Articulated Joint on the Short-Stroke Cylinder [03058685-xx]
228 Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02
3.11.3
3.11.3 Replacing the Articulated Joint on the Short-Stroke Cylinder [03058685-xx]
Replacing the Articulated Joint on the Short-Stroke Cylinder [03058685-xx]
Parts, Equipment and Tools
▪ Articulated joint – B 1/2 [03058685-xx]
▪ Outside circlip pliers with bent tips [00376466-xx]
▪ Loctite 243 [00334892-xx]
Overview
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent unauthorized
reactivation. Observe the instructions in section "1.2 Preparatory Work..." [ ➙ 13].
► Remove the cutter from the machine (see "3.11.1 Replacing the Cutter [03063781Sxx]" [ ➙ 223]).
1. Moveable blade
2. Articulated joint on the short-stroke cylinder
3. Short-stroke cylinder
CAUTION
Risk of injury!
There is a high risk of injury from the blades and the tape deflector.
► Wear appropriately thick protective gloves!
► Never reach into the cutter from below or into the empty-tape duct from above.
► Undo the 4 screws (2) fastening the back cover (1)
on the cutter and then remove the cover.
Service Work Conveyor
3.11.3 Replacing the Articulated Joint on the Short-Stroke Cylinder [03058685-xx] Cutter
Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02 229
► Remove the two screw covers (1) [03080355-xx] on
the left and right of the moveable blade (2).
► Unplug the pneumatic hoses (1) below the short-
stroke cylinder. Mark their positions, to make clear
assignment easier later on.
► Remove the two screws (1) fastening the articulated
joints on the short-stroke cylinders.
The moveable blades have now been de-coupled.
► Undo the 4 screws (1) fastening the cover on the left
and right and then remove the two shim plates (2).
► Remove the two guidances (3) on the left and right
sides.