00196497-07_SM_SXDX12_en - 第300页

Description of the Circuit Boards Electrics and Control 5.1.1 CAN switch [03083844-xx] 300 Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02 DIP switch S1.3 - S1.5 err or frame limits [03083844-02] Button S2 [03083844-02] S1.3…

100%1 / 334
Description of the Circuit Boards
5.1.1 CAN switch [03083844-xx] Electrics and Control
Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02 299
5
5 Description of the Circuit Boards
Description of the Circuit Boards
Numerous circuit boards are installed on placement machines, which are equipped with LEDs, 7-seg-
ment displays, switches and jumpers.
In this manual the statuses and functions of the visual displays on the circuit boards for diagnostic pur-
poses are listed. The description of the switches and jumper settings, for example, helps to replace cir-
cuit boards, configure the new circuit board correctly or verify the configuration of a previously installed
circuit board.
5.1
5.1 Electrics and Control
Electrics and Control
5.1.1
5.1.1 CAN switch [03083844-xx]
CAN switch [03083844-xx]
03083844-02
LED [03083844-02]
Dip switch S1 [03083844-02]
LED Color Status Signal name Description
V6 GN/RD ON P20.12/
RST001_N
1 Mbit transmission rate:
GN OK, RD: error
V7 GN/RD ON P20.4/ALE 500 kbit transmission rate:
GN OK, RD: error
V8 GN/RD ON P9./CC16IO Transmission rate:
GN 1Mbit, RD 500kbit
Switch Status Signal name Description
S1.1 OFF P5.0/AN0 ON: DIP test
S1.2 ON/OFF P5.1/AN1 ON: 500 kbit
OFF: 1 Mbit
S1.3 ON/OFF P5.2/AN2 See table Error Frame Limits
S1.4 ON/OFF P5.3/AN3
S1.5 ON/OFF P5.4/AN4
S1.6 OFF P5.5/AN5 OFF: no test, ON: testing
S1.7 ON CAN1RB 120ohms, CAN1
S1.8 ON CAN2RB 120ohms, CAN2
Description of the Circuit Boards
Electrics and Control 5.1.1 CAN switch [03083844-xx]
300 Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02
DIP switch S1.3 - S1.5 error frame limits [03083844-02]
Button S2 [03083844-02]
S1.3 S1.4 S1.5 Function
OFF OFF OFF 1 error frame
ON OFF OFF 5 error frames/min
OFF ON OFF 10 error frames/min
ON ON OFF 10 error frames/h
OFF OFF ON 50 error frames/h
ON OFF ON 100 error frames/h
OFF ON ON 500 error frames/h
Buttons Status Signal name Description
S2 When pressed SWITCH_TACT Reset error frame
Description of the Circuit Boards
5.1.2 GCU/MGCU Electrics and Control
Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02 301
5.1.2
5.1.2 GCU/MGCU
GCU/MGCU
5.1.2.1
5.1.2.1 Control module GCU-CM [03060951-xx]
Control module GCU-CM [03060951-xx]
03060951-03
This board is fitted in the GCU.
Dip switch S1 [03060951-03]
Switch Status Signal name Description
GCU1 GCU2 GCU3
S1.1 ON/OFF Portal_ID_0 ON OFF OFF
S1.2 ON/OFF Gantry_ID_1 OFF OFF ON
S1.3 ON/OFF Portal_ID_2 ON OFF ON
S1.4 ON/OFF Portal_ID_3 OFF OFF OFF