00196497-07_SM_SXDX12_en - 第316页
Description of the Circuit Boards Gantry 5.2.3 Sensor module X axis [03068500-xx] 316 Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02 5.2.3 5 . 2 . 3 S e n s o r m o d u le X a x is [ 0 3 0 6 8 5 0 0 - x x ] Sensor module X …
Description of the Circuit Boards
5.2.2 Vision board spread spectrum HCU1 [03067289-xx] Gantry
Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02 315
Previous function states
03067289-01
LED [03067289-01]
The voltage monitors trigger as soon as the nominal voltage is undershot by 5%.
(1) LEDs – voltage monitoring (2) LEDs – cameras
(3) X1, X5 – PCB camera (4) X2, X6 – CO camera
(5) DIP switch S1 (6) LEDs
(7) X7 – connecting C700 (8) X4 – connecting the trailing cable
LED Description LED Description
15V Is generated from 24 V 5V Voltage monitoring
5V Is generated from 24 V 2.5V Voltage monitoring
RUN Flashes when everything is OK 3.3V Voltage monitoring
ERROR Lights up when an error occurs 12V Voltage monitoring
RESET Lights up when the reset switch on the
DIP switch S1 has been set.
C 1 Lights up when the CO camera is ac-
tive
C2 Lights up when the PCB camera is ac-
tive
Description of the Circuit Boards
Gantry 5.2.3 Sensor module X axis [03068500-xx]
316 Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02
5.2.3
5.2.3 Sensor module X axis [03068500-xx]
Sensor module X axis [03068500-xx]
03068500-03
LED [03068500-03]
5.2.4
5.2.4 Sensor module Y axis [03064608-xx]
Sensor module Y axis [03064608-xx]
03064608-01
LED [03064608-01]
LED Color Status Signal name Description
H1 GN ON FPGA_RUN_N FPGA OK
LED Color Status Signal name Description
H2 GN ON FPGA_RUN_N FPGA OK
Description of the Circuit Boards
5.2.5 Base adapter Gantry
Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02 317
5.2.5
5.2.5 Base adapter
Base adapter
5.2.5.1
5.2.5.1 Base adapter C&P [03055516-xx]
Base adapter C&P [03055516-xx]
This board is used for the C&P20x and CPP heads on SX1/SX2/DX1/DX2 machines.
03055516-07
LED [03055516-03]
NOTICE
C&P20 P
If you are converting to a C&P20 P, the base adapter must have at least function state -06.
1 Switch S1 (see below) 2 X4 – for checking the voltages
3 Connection to the head interface C700 4 X1 and X2 – to the head
5 X4, X14 and X15 – for the HCU 6 DIP switch S2
7 7 segment display 8 LEDs H1-H11
9 X10 – Connection for vacuum pressure
sensor (if present)
LED Color Status Signal name Description
H1 GN ON CO_SENSOR CO sensor active
H2 GN ON - The programming plug for the HCU is con-
nected
H3 RD ON FPGA_TEST_6 1.5V power supply error
H4 RD ON FPGA_TEST_2 3.3V power supply error
H5 RD ON FPGA_TEST_4 5V power supply error
H6 RD ON FPGA_TEST_1 15V power supply error
H7 RD ON FPGA_TEST_3 DP power supply error, temp. without func-
tion
H8 RD ON FPGA_TEST_5 24V power supply error
H9 RD ON POWERFAIL_LOCAL PowerFail on circuit board
H10 RD ON HCU_LED_ERROR HCU error
H11 GN ON HCU_LED_OK HCU running without errors