00196497-07_SM_SXDX12_en - 第65页
Service Work Conveyor 3.2.18 Indicator Lamp and Lig ht Elements Electrical System Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02 65 3.2.18 3 . 2 . 1 8 I n d ic a t o r L a m p a n d L ig h t E le m e n t s Indicator Lamp an…
Service Work Conveyor
Electrical System 3.2.17 Replacing the Cover Fan [03094598-xx]
64 Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent unauthorized
reactivation. Observe the instructions in section "1.2 Preparatory Work..." [ ➙ 13].
► Disconnect the cover fan from the power supply.
► Undo the screws fastening the cover fan and remove the cover fan.
Installation
► Follow the removal instructions in reverse order for installation. Also observe the following instruc-
tions:
CAUTION
Installation instructions
► Note the direction of air flow from the cover fan. The air must flow upwards, out of the ma-
chine.
► If an old version of the fan is replaced by a new version, it may be necessary to reconnect
the crimp contacts.
Service Work Conveyor
3.2.18 Indicator Lamp and Light Elements Electrical System
Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02 65
3.2.18
3.2.18 Indicator Lamp and Light Elements
Indicator Lamp and Light Elements
3.2.18.1
3.2.18.1 Replacing the Indicator Lamp (Variant 1)
Replacing the Indicator Lamp (Variant 1)
Parts, Equipment and Tools
▪ Fault indicator lamp [03033143-xx]
Removal/Installation
► Switch off the machine, disconnect it from the power supply and secure it to prevent unauthorized
reactivation. Observe the instructions in section "1.2 Preparatory Work..." [ ➙ 13].
► Check the function of the indicator lamp.
NOTICE
Two- and three-part fault indicator lamp
In the standard configuration, the fault indicator lamp is equipped with a green continuous light
element [03004318-xx] and a clear one [03004317-xx].
On machines from No. M001 upwards, it is possible to equip the machine with a three-part fault
indicator lamp:
3 color tower light SIPLACE SX [00519855-xx]
The clear continuous light element is replaced by a yellow one and a red one each.
NOTICE
LED light elements
For this type, you can also use the "LED bulb socket B15d 24V AC/DC clear" [03099236-xx] as
an alternative to the "Incandescent lamp BA15d 24V/5W" [03005204-xx].
Indicator lamp (SX1 as example)
► Carefully pull the cable out of the indicator lamp
tube (1) and unplug the connector (3).
► Loosen the two clamping screws (2) on the clamp
[03063682-xx] and lift off the indicator lamp.
► Installation is performed by following the above in-
structions in the reverse order.
When inserting the light element, observe the identi-
fication on the casing.
Service Work Conveyor
Electrical System 3.2.18 Indicator Lamp and Light Elements
66 Service Manual SIPLACE SX1/SX2/DX1/DX2 FS02
3.2.18.2
3.2.18.2 Replacing the Indicator Lamp (Variant 2)
Replacing the Indicator Lamp (Variant 2)
Parts, Equipment and Tools
▪ Tower light standard [03103121-xx]
Overview
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent unauthorized
reactivation. Observe the instructions in section "1.2 Preparatory Work..." [ ➙ 13].
► Remove the monitor. Unplug all electrical connections and undo the screws fastening the monitor to
its holder.
► Loosen the two screws on the holder [03116272Sxx].
► Pull the indicator lamp with its retaining bracket up and out of the holder.
► Unplug the indicator lamp.
Installation
► Installation is performed by following the above instructions in the reverse order.
When inserting the light element, observe the identification on the casing.
► Check the function of the indicator lamp.
NOTICE
Two- and three-part fault indicator lamp
The fault indicator lamp consists of a green basic module and can be configured as a two-part
version a three-part version:
► Light tower two colors [00519895Sxx] (with an additional white continuous light element)
► Light tower three colors [00519896Sxx] (with an additional red and yellow continuous light
element)
1. Indicator lamp (variant 2)
2. Indicator lamp retaining bracket
3. Monitor holder
The retaining bracket of the indicator lamp is fixed to the
monitor holder by means of fastening screws.