00192662-01.pdf - 第84页
2 Operational Safety User Manual SIPLACE F5/F5 HM 2.1 Safety instru ctions Software version SR.407.xx 01/2001 US Edition 84 Fig. 2.1 - 6 Fine-pitch and flip chip vis ion module, coplanarity laser module (1) Fi ne- pitc h…
User Manual SIPLACE F5/F5 HM 2 Operational Safety
Software version SR.407.xx 01/2001 US Edition 2.1 Safety instructions
83
2.1.7 Safety instructions for the component vision modules
DANGER 2
NEVER modify or bypass safety devices on the placement machine or on the fine pitch or flip chip
vision module. 2
The optical radiation from the fine pitch or flip chip vision module conforms to laser class 1, pro-
vided that the module is permanently installed in the placement machine and the protective hoods
are closed (EN 60825-1 and IEC 825). 2
Fig. 2.1 - 5 Identification of laser class 1
Class 1 Laser Product
2 Operational Safety User Manual SIPLACE F5/F5 HM
2.1 Safety instructions Software version SR.407.xx 01/2001 US Edition
84
Fig. 2.1 - 6 Fine-pitch and flip chip vision module, coplanarity laser module
(1) Fine-pitch vision module
(2) Flip chip vision module
(3) Coplanarity laser module
2
User Manual SIPLACE F5/F5 HM 2 Operational Safety
Software version SR.407.xx 01/2001 US Edition 2.1 Safety instructions
85
2.1.8 Safety instructions for the coplanarity laser module
DANGER
You must not make any modifications whatsoever to or tamper with the safety features or co-
planarity laser module (see Fig. 2.1 - 6).
2
The coplanarity laser module - without
safety features - corresponds to Laser
class 3B (see Fig. 2.1 - 7
)
This means danger to eyes and skin!
For this reason the safety features
should under no circumstances
be
circumvented.
2
2
2
2
Fig. 2.1 - 7 Identification label for Laser class 3B
To enable the laser module in Laser class 1 to be operated with no danger to eyes and skin the
following safety features have been installed in the machine:
2
The interlock line is connected in series with
the switches for the protective cover. Even if
the key-operated switch is used to circum-
vent the protective devices this particular
protective feature will not be disabled. This
means that the laser module can be oper-
ated only within the closed machine. 2
Fig. 2.1 - 8 Identification label for Laser class 1
INVISIBLE LASER RADIATION
DO NOT EXPOSE TO BEAM
CLASS 3 B LASER PRODUCT
1MW MAX., 670 NM;
AS PER IEC 825-1(1993)
Class 1 Laser Product