TRS GEM Manual for Intel Ver 1.1 - 第16页
GEM Manual for DEK P rinters Machine GEM Com plian ce Issue 1.1 March 20th, 2014 Page 16 of 152 Page 16 of 152 GEM Requirem ent Screen actuator error (AL ID 28) Paste cartridg e paste error (AL ID 29) Screen chang er dri…
GEM Manual for DEK Printers Machine GEM Compliance
Issue 1.1 March 20th, 2014 Page 15 of 152 Page 15 of 152
GEM Requirement
Host Command Erase Session Failed (CEID 40330)
Host Command Rename Product Failed (CEID 40331)
Host Command Adjust Parameter Failed (CEID 40332)
Host Command Clean 1 Failed (CEID 40333)
Host Command Clean 2 Failed (CEID 40334)
Host Command Paste Failed (CEID 40335)
Host Command PP-Select Failed (CEID 40336)
Host Command Change Screen Failed (CEID 40337)
Host Command Knead Paste Failed (CEID 40338)
Host Command Save Product Failed (CEID 40376)
Limit Monitoring Events
Status Variable Limit Events
humidity (CEID 31008)
Temperature (CEID 31016)
batch_count (CEID 31020)
Discrete Data Variable Limit Events
measured_cycle_time (CEID 32004)
throughput_cycle_time (CEID 32005)
front_print_pressure (CEID 32008)
rear_print_pressure (CEID 32009)
print_speed (CEID 32010)
table_separation_speed (CEID 32011)
board_stretch_error (CEID 32012)
Xerr (CEID 32013)
Yerr (CEID 32014)
theta_err (CEID 32015)
board_fiducial_1_score (CEID 32021)
board_fiducial_2_score (CEID 32022)
board_fiducial_3_score (CEID 32023)
screen_fiducial_1_score (CEID 32024)
screen_fiducial_2_score (CEID 32025)
screen_fiducial_3_score (CEID 32026)
ProflowPastePressure (CEID 32031)
front_print_speed (CEID 32086)
rear_print_speed (CEID 32087)
Alarms
Cover open (ALID 1)
Head open (ALID 2)
System power down (ALID 11)
Pneumatic power down (ALID 12)
Front squeegee error (ALID 21)
Rear squeegee error (ALID 22)
Rising table error (ALID 23)
Print carriage error (ALID 24)
Paste carriage error (ALID 25)
Camera error (ALID 26)
Rail width error (ALID 27)
GEM Manual for DEK Printers Machine GEM Compliance
Issue 1.1 March 20th, 2014 Page 16 of 152 Page 16 of 152
GEM Requirement
Screen actuator error (ALID 28)
Paste cartridge paste error (ALID 29)
Screen changer drive error (ALID 30)
Lib bolt fault (ALID 31)
Screen couplings failed (ALID 32)
Camera X failed to position (ALID 33)
Camera Y failed to position (ALID 34)
ProFlow error (ALID 35)
CAN node down (ALID 36)
CAN bus down (ALID 37)
Dongle error (ALID 38)
Roll height monitor failed (ALID 39)
Servo following error (ALID 40)
Board stop stuck (ALID 51)
Board clamp stuck (ALID 52)
Board stuck in rails (ALID 53)
Upline transfer error (ALID 54)
Downline transfer error (ALID 55)
Rail lifted error (ALID 71)
Alignment out of range (ALID 72)
Stencil aperture blocked (ALID 73)
Stencil smeared (ALID 74)
Insufficient paste on pad (ALID 75)
Bridging detected (ALID 76)
Paste/pad alignment error (ALID 77)
Paste volume alarm (ALID 78)
Knead pressure error - front (ALID 79)
Knead pressure error - rear (ALID 80)
Print pressure error - front (ALID 81)
Print pressure error - rear (ALID 82)
Board fiducial 1 not found (ALID 83)
Board fiducial 2 not found (ALID 84)
Board fiducial 3 not found (ALID 85)
Screen fiducial 1 not found (ALID 86)
Screen fiducial 2 not found (ALID 87)
Screen fiducial 3 not found (ALID 88)
Select mark not found (ALID 89)
Bad vacuum tooling (ALID 90)
Verification item failed (ALID 92)
Product ID verification failed (ALID 93)
No cleaner paper (ALID 101)
No cleaner solvent (ALID 102)
Vortex cassette expired (ALID 103)
Paste cartridge empty (ALID 104)
Remote Commands
START
STOP
ERASE_LOG
ERASE_BATCH
GEM Manual for DEK Printers Capabilities
Issue 1.1 March 20th, 2014 Page 17 of 152 Page 17 of 152
GEM Requirement
ERASE_SESSION
RENAME_PRODUCT
ADJUST_PARAMETER
CLEAN
CLEAN_2
PASTE
PP-SELECT
CHANGE_SCREEN
KNEAD_PASTE
PAUSE
Capabilities
Establishing Communications 5.1
Data Collection 5.2
Alarm Management 5.3
Remote Control 5.4
Equipment Constants 5.5
Process Program Management 5.6
Material Movement 5.7
Equipment Terminal Services 5.8
Error Messages 5.9
Clock 5.10
Limits Monitoring 5.11
Spooling 5.12
Verification and Traceability 5.13