CP43操作手册.pdf.pdf - 第138页
• Action of the Function Keys Cam Org. Pos : Press to r eturn cam axis to its origin position. While this key remains pr essed the cam will move toward its origin position. Movement stops when the cam returns to its orig…
• Action of the Function Keys
AUTO : Press to carry out automatic operation of the
machine.
STEP : Press to carry out step operation of the
machine.
LOADER : Press to operate the loader.
PROGRAM : Press to select a production program.
SET : Press to make other settings.
✳ : This function key has no action.
This command page is displayed after the machine zeroing is
complete. It is also displayed when the [F6] function key is
pressed repeatedly from any command page.
• Function Key Menu
Chapter 3 Description of Commands
To Page 100/000
To Page 200/000
To Page 300/000
To Page 400/000
To Page 500/000
Ready
Part 3
3 – 12
Page
000 000
AUTO STEP LOADER PROGRAM SET
✳
Version 5.0
FCP IV-3 Operation
• Action of the Function Keys
Cam Org. Pos : Press to return cam axis to its origin
position. While this key remains pressed
the cam will move toward its origin
position. Movement stops when the cam
returns to its origin. Movement also stops if
the key is released before the cam reaches
its origin.
The message "Return Cam to Zero" displays
in the second display area until the cam
reaches its origin. When the cam has
returned the message "Press START"
displays.
MARK EDITOR: Fiducial Mark Recovery command.
This command is available only for a
program using a fiducial mark sequence.
SEQ. NO : Press to input the sequence number from
which operation is to be started.
MODE : Press to select the operation mode.
Production Parts are picked-up and placed (usual
operation).
Simulate Only the X, Y, D1, D2 axes operate. Boards
are loaded in and sent out (used for
checking loading position etc).
Idle This machine runs continuously without
bringing in or sending out boards. Vision
processing is not performed. At ST 1 and ST
7 the nozzle lowers. Run this mode without
any parts on the nozzles. This mode is not
for production.
• Function Key Menu
Chapter 3 Description of Commands
To Page 130/000
Automatic Operation
Part 3
3 – 13
AUTO
Page
100 000
Cam Org. Pos
MARK EDITOR SEQ. NO. MODE RETURN
Version 5.0
FCP IV-3 Operation
FCP IV-3 Operation
Chapter 3 Description of Commands
Part 3
3 – 14
Version 5.0
Note: The production mode is automatically selected when the power
supply is turned on.
RETURN : Press to return to Page 000/000.
• START Button
Pressing the [START] button begins automatic operation.
• First Status Area:
Auto
• Second Display Area
If start conditions are fulfiled, the message “Press START”
flashes. Otherwise an error displays.
To Page 000/000
To Page 170/000