CP43操作手册.pdf.pdf - 第163页
• Action of the Function Keys + P AGE : Pr ess to display the next page. - P AGE : Press to display the previous page. ▲ : Pr ess to move the cursor up one line. ▼ : Pr ess to move the cursor down one line. DA T A INPUT …
• First Display Area
D001 Un Set [0013] Device_comment_No_1
D002 Parts E [0008] Korewa_No2_Desu
D003 [0002] PCPR102TL
D005 Vision [0001] MSD2HD256
D006 Tape E [0005] Micro_Tr_Nol
D007 Next d [0007] Super_Mini_Tr
D008 [0002] Nihongonetute
D009 Pickup [0003] N3456Sd23
D010 [0015] Jaf
D015 Un Set [0023] RECT3216060
Of the devices that are used in the program, only the that
currently have a condition such as "Un Set", "Parts E", "Pickup",
or "Vision" display in this mode.
In this mode when devices are checked they will disappear
from the screen.
The operation procedure is the same as with the other 2 modes.
• Function Key Menu
Chapter 3 Description of Commands
Device Check Mode 3
Part 3
3 – 37
MODE 3
Page
451 300
+PAGE -PAGE
▲
▼
ESCAPE RETURN
Version 5.0
FCP IV-3 Operation
• Action of the Function Keys
+ PAGE : Press to display the next page.
- PAGE : Press to display the previous page.
▲ :Press to move the cursor up one line.
▼ :Press to move the cursor down one line.
DATA INPUT :Press this key after selecting the device
number. "DATA?" will display in the second
status area. Enter offset values in Proper Data
from the numerical keypad in units of
1/1000mm.
RETURN :Press to return to Page 450/000.
• First Status Area
Offset
• Second Status Area
D No ?
• First Display Area
DEVICE OFFSET Editor
No. Proper DATA Part DATA Auto Rev.
D001 -00.241 [mm] **** [mm] ****** [mm]
D002 -00.205 [mm] **** [mm] ****** [mm]
D003 00.000 [mm] **** [mm] ****** [mm]
D004 00.000 [mm] **** [mm] ****** [mm]
D005 00.000 [mm] **** [mm] ****** [mm]
D006 00.000 [mm] **** [mm] ****** [mm]
D007 00.000 [mm] **** [mm] ****** [mm]
D008 00.000 [mm] **** [mm] ****** [mm]
D009 00.000 [mm] **** [mm] ****** [mm]
D010 00.000 [mm] **** [mm] ****** [mm]
• Function Key Menu
Chapter 3 Description of Commands
To Page 455/500
To Page 450/000
Setting Device Offsets
Part 3
3 – 38
OFFSET
Page
455 000
+PAGE -PAGE
▲
▼
DATA INPUT RETURN
Version 5.0
FCP IV-3 Operation
Chapter 3 Description of Commands
Part 3
3 – 39
Version 5.0
FCP IV-3 Operation
No. : Device number
Proper : The Proper data settings for Device Offset 1 ~ Device Offset 140
are displayed here. These settings can be entered directly at the
machine.
Part Data : The Part data settings in Pickup_ofset are displayed here. The
asterisks indicate that the device is not being used. These settings
cannot be entered directly at the machine.
Auto Rev. : The amount of automatic offset is displayed here. The asterisks
indicate that the device is not being used. These settings cannot
be entered directly at the machine.