CP43操作手册.pdf.pdf - 第165页
• Action of the Function Keys ST A TUS : Press to change the machine status. MANUAL : Press to perform manual settings. PROPER : Pr ess to make Proper Data measur ements. T o use this command the operator must enter an I…
Chapter 3 Description of Commands
Part 3
3 – 39
Version 5.0
FCP IV-3 Operation
No. : Device number
Proper : The Proper data settings for Device Offset 1 ~ Device Offset 140
are displayed here. These settings can be entered directly at the
machine.
Part Data : The Part data settings in Pickup_ofset are displayed here. The
asterisks indicate that the device is not being used. These settings
cannot be entered directly at the machine.
Auto Rev. : The amount of automatic offset is displayed here. The asterisks
indicate that the device is not being used. These settings cannot
be entered directly at the machine.
• Action of the Function Keys
STATUS : Press to change the machine status.
MANUAL : Press to perform manual settings.
PROPER : Press to make Proper Data measurements. To
use this command the operator must enter an
ID code. Refer to the maintenance manual for
further information.
SERVO : Press to set servo parameters.
POSITION : Press to move the X, Y D1 and D2 axes to
desired positions.
RETURN : Press to return to Page 000/000.
• Function Key Menu
Chapter 3 Description of Commands
To Page 510/000
To Page 520/000
To Page 530/000
To Page 540/000
To Page 550/000
To Page 000/000
Performing Settings and
Checks
Part 3
3 – 40
SET
Page
500 000
STATUS MANUAL PROPER SERVO POSITION RETURN
Version 5.0
FCP IV-3 Operation
• Action of the Function Keys
RECOVERY :Press to select the recovery mode.
PASS :Press to select production or pass mode.
When the machine is operating in pass mode,
P MODE or PASS will be displayed in
cyan.TURNOVER : Press to select
turnover mode. This command is not
presently supported. Do not press this
function key.
TURNOVER: Press to select turnover mode. This
command is not presently supported. Do not
press this function key.
TABLE MODE :Press to change the device table operation
mode.
LINE :Press to select the communication mode with
the MCS 30 computer.
RETURN :Press to return to page 500/000.
• First Display Area
Turnover Mode
ST1.N 65 D 2 Er **** STATUS
ST2.N 64 D 2 Er **** P Mode Product
ST3.N 63 D 2 Er **** Recovery 3times
ST4.N 62 D 2 Er **** T Mode Joint
ST5.N 61 D 2 Er 0
ST6.N 60 D 2 Er 0
ST7.N 59 D 2 Er 0
Normal Turnover
• Function Key Menu
Chapter 3 Description of Commands
To Page 511/000
To Page 514/000
To Page 515/000
To Page 500/000
Changing the Machine Status
Part 3
3 – 41
STATUS
Page
510 000
RECOVERY PASS TURNOVER TABLE MODE LINE RETURN
Version 5.0
FCP IV-3 Operation