CP43操作手册.pdf.pdf - 第166页
• Action of the Function Keys RECOVER Y : Press to select the r ecovery mode. P ASS : Press to select pr oduction or pass mode. When the machine is operating in pass mode, P MODE or P ASS will be displayed in cyan.TURNOV…
• Action of the Function Keys
STATUS : Press to change the machine status.
MANUAL : Press to perform manual settings.
PROPER : Press to make Proper Data measurements. To
use this command the operator must enter an
ID code. Refer to the maintenance manual for
further information.
SERVO : Press to set servo parameters.
POSITION : Press to move the X, Y D1 and D2 axes to
desired positions.
RETURN : Press to return to Page 000/000.
• Function Key Menu
Chapter 3 Description of Commands
To Page 510/000
To Page 520/000
To Page 530/000
To Page 540/000
To Page 550/000
To Page 000/000
Performing Settings and
Checks
Part 3
3 – 40
SET
Page
500 000
STATUS MANUAL PROPER SERVO POSITION RETURN
Version 5.0
FCP IV-3 Operation
• Action of the Function Keys
RECOVERY :Press to select the recovery mode.
PASS :Press to select production or pass mode.
When the machine is operating in pass mode,
P MODE or PASS will be displayed in
cyan.TURNOVER : Press to select
turnover mode. This command is not
presently supported. Do not press this
function key.
TURNOVER: Press to select turnover mode. This
command is not presently supported. Do not
press this function key.
TABLE MODE :Press to change the device table operation
mode.
LINE :Press to select the communication mode with
the MCS 30 computer.
RETURN :Press to return to page 500/000.
• First Display Area
Turnover Mode
ST1.N 65 D 2 Er **** STATUS
ST2.N 64 D 2 Er **** P Mode Product
ST3.N 63 D 2 Er **** Recovery 3times
ST4.N 62 D 2 Er **** T Mode Joint
ST5.N 61 D 2 Er 0
ST6.N 60 D 2 Er 0
ST7.N 59 D 2 Er 0
Normal Turnover
• Function Key Menu
Chapter 3 Description of Commands
To Page 511/000
To Page 514/000
To Page 515/000
To Page 500/000
Changing the Machine Status
Part 3
3 – 41
STATUS
Page
510 000
RECOVERY PASS TURNOVER TABLE MODE LINE RETURN
Version 5.0
FCP IV-3 Operation
FCP IV-3 Operation
• Action of the Function Keys
TIMES :Enter any number from 1 to 9 inclusive to set the number of
recovery attempts, and press the [CR] key to execute the
change.
CHANGE :The machine automatically goes into auto-recovery mode when
the power is first turned on. The recovery mode changes every
time this key is pressed.
Auto-recovery:Recovery automatically takes place when an
error has occurred. If the set number of times
recovery is to take place is exceeded, the
machine stops automatically. “Auto-recovery”
and the set number is displayed.…
Error stop :Machine operation stops if an error, such as a
vision processing or pick-up error occurs.
“Error stop” is displayed in yellow.
Error pass :Machine continues to operate if an error occurs.
“Error pass” is displayed in red.
RETURN :Press to return to page 510/000.
• Function Key Menu
Chapter 3 Description of Commands
Setting Recovery
Part 3
3 – 42
RECOVERY
Page
511 000
TIMES CHANGE RETURN
Version 5.0