CP43操作手册.pdf.pdf - 第180页
• Action of the Function Keys DSP MEM-IMG : If an image remains in memory on the vision processing boar d then this image will be displayed and will be vision processed again. ACQR INSPECT : Press to carry out the block …
• Action of the Function Keys
DSP MEM-IMG : If an image remains in memory on the
vision processing board then this image
will be displayed and will be vision
processed again.
ACQR INSPECT : Press to acquire the image currently being
displayed by the fiducial mark camera.
DSP REAL-IMG : Press to display the actual image of the
fiducial mark camera.
RETURN : Press to return to Page 522/100.
• First Status Area
F MARK
• First Display Area
DSP FID MARK ACQR INSPECT
• Function Key Menu
Chapter 3 Description of Commands
To Page 522/121
To Page 522/122
To Page 522/100
Fiducial Mark Vision Processing
Check
Part 3
3 – 54
F_MARK
Page
522 120
DSP MEM-IMG
ACQR INSPECT
DSP REAL-IMG RETURN
Version 5.0
FCP IV-3 Operation
• Action of the Function Keys
DSP MEM-IMG : If an image remains in memory on the
vision processing board then this image
will be displayed and will be vision
processed again.
ACQR INSPECT : Press to carry out the block skip mark
setting.
DSP REAL-IMG : Press to display the actual image of the
fiducial mark camera.
RETURN : Press to return to Page 522/100.
• First Status Area
B MARK
• First Display Area
ACQR INSPECT
• Function Key Menu
Chapter 3 Description of Commands
To Page 522/131
To Page 522/132
To Page 522/100
Block Skip Mark Vision
Processing Check
Part 3
3 – 55
B_MARK
Page
522 130
DSP MEM-IMG ACQR INSPECT DSP REAL-IMG RETURN
Version 5.0
FCP IV-3 Operation
• Action of the Function Keys
▲ : Press to move the cursor upward on the vision
processing screen.
▼ : Press to move the cursor downward on the
vision processing screen.
ON/OFF : Press to select or cancel the item identified by
the cursor.
CLEAR : Press to cancel all of the trace mode settings.
THROUGH : Press to return the vision processing screen to
the actual image.
RETURN : Press to return Page 522/100.
• Vision Processing Trace Mode
The actual process and/or the results of the vision process can
be displayed on the screen for each trace mode setting (it is
possible to include several together). The trace mode can be
used to check the device description created by the user and if
there are any problems it can be used to visually inspect the
problem point to get an idea about what is wrong. However,
due to the additional graphic display processing, the vision
processing becomes extremely slow. The vision trace function
is intended for use as a debugging tool and is not normally
used. The use of this function during automatic operation
will cause problems.
• Function Key Menu
Chapter 3 Description of Commands
To Page 522/100
Vision Processing Trace
Part 3
3 – 56
TRACE
Page
522 140
▲
▼
ON/OFF CLEAR THROUGH RETURN
Version 5.0
FCP IV-3 Operation