CP43操作手册.pdf.pdf - 第201页
• Action of the Function Keys RETURN : Press to r eturn to page 534/500. The "Press ST AR T" message for nozzle center measurement begins flashing. (a) The amount of allowable nozzle bend displays. (b) Head err…
• Action of the Function Keys
Wide :Press to display the measured data on the wide
view parts camera.
Narrow :Press to display the measured data on the
narrow view parts camera.
RETURN :Press to return to page 523/100. The "Press
START" message for nozzle center
measurement begins flashing.
• Function Key Menu
Chapter 3 Description of Commands
To Page 523/151
To Page 523/152
To Page 523/100
Displaying Amount of Nozzle
Bend
Part 3
3 – 75
RESULTS
Page
523 150
WIDE NARROW RETURN
Version 5.0
FCP IV-3 Operation
• Action of the Function Keys
RETURN :Press to return to page 534/500. The "Press
START" message for nozzle center
measurement begins flashing.
(a) The amount of allowable nozzle bend displays.
(b) Head errors display here. If there is a large discrepancy
between the nozzle center or rotation and the center of
the acquired image, the image of the part may be larger
than the nozzle depending on the size of the picked
part. The heads of these nozzles display here.
(c) NG displays if the actual nozzle diameter is not within
±15% of the nozzle diameter set in the program.
(d) The distance between the measured center of rotation
and the nozzle tip displays here. The display is in green
if the measurement is within the set tolerance and in red
if the measurement is outside of the set tolerance.
• Function Key Menu
Chapter 3 Description of Commands
To Page 523/000
Displaying Amount of Nozzle
Bend
Part 3
3 – 76
WIDE / NARROW
Page
523 151
152
RETURN
Version 5.0
FCP IV-3 Operation
HEAD A
HEAD B
HEAD C
HEAD D
HEAD E
HEAD F
HEAD G
HEAD H
HEAD I
HEAD J
HEAD K
HEAD L
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
NG
NG
NG
NG
NG
NG
NG
NG
NG
NG
NG
NG
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
S 0.000
M 0.000
L 0.000
LIMIT
B ENT NOZZLE [mm] AND NOZZLE DIAMETER CHECK
Problem head
A-S B-M
B-L
Results of nozzle diameter check
OK: Nozzle diameter is same as specified
NG: Nozzle diameter is different than
the specified diameter
Nozzle bend limit settings
Head errors display here.
Errors are determined by
comparing the holder center
of rotation with the image
acquisition area.
A-S stands for the S nozzle
on the A head.
Nozzle bend measurement results
(a)
(b)
(c)
(d)
• Action of the Function Keys
SIZE : Press to choose between S, M or L nozzles.
▲ : Press to move the cursor up one line.
▼ : Press to move the cursor down one line.
SKIP : Align the cursor with the nozzle to be skipped.
Press this key to skip the nozzle and "SKIP" will
display in yellow beside the nozzle. Use the
same key to cancel the skip function. When the
cursor is set at a nozzle which has been set to be
skipped, the command will change to
“CLEAR”.
RETURN : Press to return to Page 520/000.
• Second Status Area
NOZZLE SKIP
• First Display Area
NOZZLE SKIP SETTINGS
S NOZZLE M NOZZLE L NOZZLE
HEAD A HEAD A SKIP HEAD A
HEAD B SKIP HEAD B HEAD B
HEAD C HEAD C HEAD C
HEAD D HEAD D HEAD D
HEAD E HEAD E HEAD E
HEAD F HEAD F HEAD F SKIP
HEAD G HEAD G HEAD G
HEAD H HEAD H HEAD H
HEAD I HEAD I HEAD I
HEAD J HEAD J HEAD J
HEAD K HEAD K HEAD K
HEAD L HEAD L HEAD L
• Function Key Menu
Chapter 3 Description of Commands
To Page 520/000
Skipping Nozzles
Part 3
3 – 77
NOZ SKIP
Page
523 200
SIZE
▲ ▼
SKIP
(CANCEL)
RETURN
Version 5.0
FCP IV-3 Operation